sonr/test/e2e/usdc-swap-did

USDC Swap with DID E2E Tests

Comprehensive end-to-end tests for USDC swap functionality with DID-based Interchain Accounts (ICA) on Noble testnet.

Overview

This test suite validates the complete USDC swap flow including:

• DID creation and management
• DEX account registration via ICA
• Cross-chain USDC swaps (SNR ↔ USDC)
• Noble testnet IBC integration
• Swap routing and slippage protection
• Event verification and transaction history

Prerequisites

Network Setup

1. Sonr Testnet: Running local testnet with DEX module enabled
2. Noble Testnet Connection: IBC connection established to Noble testnet (grand-1)
3. IBC Relayer: Active relayer between Sonr and Noble chains
4. Test Tokens:
   • SNR tokens for gas and swaps
   • USDC tokens on Noble testnet (optional for full E2E)

Configuration

The tests use these default configurations:

// Noble Testnet
NobleChainID     = "noble-grand-1"
NobleConnectionID = "connection-noble"  // Update with actual connection
NobleUSDCDenom   = "uusdc"

// Test Amounts
USDCTestAmount   = 1_000_000  // 1 USDC (6 decimals)
SNRSwapAmount    = 1_000_000  // 1 SNR (6 decimals)
SlippageTolerance = 0.05      // 5% slippage

Test Suite Structure

Test Cases

01. Verify Noble Configuration

Purpose: Validates Noble chain configuration and constants Validates:

• Noble chain ID recognition
• USDC denomination configuration
• Decimal places (6 for USDC)
• Chain type detection

02. Create DID Document

Purpose: Creates a test DID for swap operations Operations:

• Generate unique DID for test
• Create DID document on-chain
• Verify DID can be queried
• Validate DID structure

03. Register DEX Account

Purpose: Registers an ICA account on Noble connection Operations:

• Register DEX account with Noble connection
• Enable swap and liquidity features
• Wait for ICA channel handshake
• Verify account status and ICA address

Expected States:

• ACCOUNT_STATUS_PENDING: Initial state during handshake
• ACCOUNT_STATUS_ACTIVE: Account ready for operations
• ACCOUNT_STATUS_FAILED: Handshake failed

04. Execute USDC Swap (SNR → USDC)

Purpose: Tests swapping SNR to USDC on Noble Flow:

1. Setup DID and DEX account
2. Calculate minimum output with slippage
3. Execute swap via ICA
4. Verify transaction success
5. Check swap event emission

Parameters:

Amount:       1_000_000 usnr (1 SNR)
MinAmountOut: 950_000 uusdc (0.95 USDC - 5% slippage)
Timeout:      60 seconds

05. Execute USDC Swap (USDC → SNR)

Purpose: Tests reverse swap (USDC to SNR) Flow: Same as Test 04 but with reversed denoms

06. Swap With Invalid Parameters

Purpose: Tests error handling and validation Test Cases:

• Zero amount swap
• Same source/target denom
• Negative minimum output
• Invalid connection ID

Expected: All cases should fail gracefully

07. Swap With UCAN Permission

Purpose: Tests UCAN-authorized delegated swaps Status: Currently skipped (requires full UCAN setup) Features:

• UCAN token generation
• Permission validation
• Delegated execution

08. Query DEX History

Purpose: Verifies transaction history tracking Validates:

• History query endpoint
• Activity records
• Transaction metadata
• Status tracking

09. Multiple Sequential Swaps

Purpose: Tests executing multiple swaps in sequence Operations:

• Execute 3 swaps sequentially
• Verify each transaction succeeds
• Check for nonce/sequence handling
• Validate no race conditions

Running the Tests

Quick Start

# Navigate to test directory
cd test/e2e/usdc-swap-did

# Run all tests
go test -v

# Run specific test
go test -v -run TestUSDCSwapE2E/Test04_ExecuteUSDCSwap_SNRToUSDC

# Run with timeout
go test -v -timeout 10m

Prerequisites Check

Before running tests, ensure:

# 1. Verify Noble connection exists
snrd query ibc connection end connection-noble

# 2. Check connection is open
# Expected output: state: STATE_OPEN

# 3. Verify ICA channel
snrd query ibc channel channels --node tcp://localhost:26657

# 4. Check DEX module is enabled
snrd query dex params

Full E2E Setup

# 1. Start Sonr testnet
make testnet

# 2. Establish Noble connection (one-time setup)
# This requires:
# - Noble testnet access
# - IBC relayer configuration
# - Channel creation

# 3. Fund test accounts
# The tests will auto-fund via faucet, but you can pre-fund:
snrd tx bank send validator <test-address> 100000000usnr --yes

# 4. Run tests
cd test/e2e/usdc-swap-did && go test -v

Test Utilities

Helper Functions

DID Operations

// Create test DID
did, err := CreateTestDID(ctx, cfg, account, didID)

// Query DID
did, err := QueryDID(ctx, cfg, didID)

DEX Operations

// Query DEX account
account, err := QueryDEXAccount(ctx, cfg, didID, connectionID)

// Query transaction history
history, err := QueryDEXHistory(ctx, cfg, didID)

// Wait for account activation
active, err := WaitForDEXAccountActivation(ctx, cfg, didID, connectionID, timeout)

Swap Utilities

// Validate parameters
err := ValidateSwapParameters(sourceDenom, targetDenom, amount, minOut)

// Calculate slippage
minOut := CalculateMinimumOutput(amount, slippagePct)

// Format amounts for display
formatted := FormatUSDCAmount(1000000) // "1.000000 USDC"
formatted = FormatSNRAmount(1000000)   // "1.000000 SNR"

Assertions

The test suite uses testify/suite and testify/require for assertions:

// Transaction success
require.NoError(t, err)
require.Equal(t, uint32(0), txResp.Code)

// Balance checks
balance := s.getBalance(address, denom)
require.True(t, balance.GT(minAmount))

// Event verification
s.verifySwapEvent(txHash, did, connectionID)

Configuration

Update Connection ID

Before running tests, update the Noble connection ID in usdc_swap_test.go:

const (
    NobleConnectionID = "connection-0"  // Replace with actual connection ID
)

To find the connection ID:

# List all connections
snrd query ibc connection connections

# Look for connection to Noble (grand-1)
# Update NobleConnectionID constant with the correct value

Custom Test Configuration

Create a custom config for your environment:

cfg := &utils.TestConfig{
    ChainID:        "sonrtest_1-1",
    BaseURL:        "http://localhost:1317",
    NobleConnection: "connection-0",  // Your Noble connection
    // ... other settings
}

Troubleshooting

Common Issues

1. Connection Not Found

Error: connection connection-noble not found

Solution: Update NobleConnectionID constant with actual connection ID

2. ICA Account Pending

⚠ ICA address pending (channel handshake may be in progress)

Solution: Wait for ICA channel handshake to complete (can take 1-2 minutes)

3. Swap Transaction Fails

Error: DEX account not active

Solution: Ensure ICA account is in ACCOUNT_STATUS_ACTIVE state

4. Insufficient Funds

Error: insufficient funds

Solution: Fund test account with SNR tokens

Debug Mode

Enable verbose logging:

# Run with verbose output
go test -v -run TestUSDCSwapE2E 2>&1 | tee test.log

# Check specific test output
grep "Test 04" test.log

# View all swap events
grep "Swap" test.log

Verify IBC Setup

# Check IBC clients
snrd query ibc client states

# Check channels
snrd query ibc channel channels

# Check connections
snrd query ibc connection connections

# Monitor relayer
# (depends on your relayer setup)

Integration with CI/CD

GitHub Actions

name: USDC Swap E2E Tests

on: [push, pull_request]

jobs:
  e2e-usdc-swap:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v3
      - uses: actions/setup-go@v4
        with:
          go-version: '1.21'

      - name: Start Testnet
        run: make testnet

      - name: Wait for Network
        run: sleep 30

      - name: Run E2E Tests
        run: |
          cd test/e2e/usdc-swap-did
          go test -v -timeout 10m

Expected Output

Successful Test Run

=== RUN   TestUSDCSwapE2E
=== RUN   TestUSDCSwapE2E/Test01_VerifyNobleConfiguration
=== Test 01: Verify Noble Configuration ===
✓ Noble configuration verified successfully
=== RUN   TestUSDCSwapE2E/Test02_CreateDIDDocument
=== Test 02: Create DID Document ===
✓ DID document created: did:snr:test_1234567890
✓ DID query verification successful
=== RUN   TestUSDCSwapE2E/Test03_RegisterDEXAccount
=== Test 03: Register DEX Account ===
✓ DEX account registered, tx hash: ABC123...
✓ DEX account status: ACCOUNT_STATUS_ACTIVE
✓ ICA port ID: icacontroller-did:snr:test_1234567890-connection-0
✓ ICA address: noble1abc...xyz
=== RUN   TestUSDCSwapE2E/Test04_ExecuteUSDCSwap_SNRToUSDC
=== Test 04: Execute USDC Swap (SNR → USDC) ===
Initial SNR balance: 10000000
✓ Swap transaction broadcasted, tx hash: DEF456...
✓ Found swap event for DID: did:snr:test_1234567890
✓ Swap execution test completed
...
--- PASS: TestUSDCSwapE2E (45.23s)
PASS
ok      github.com/sonr-io/sonr/test/e2e/usdc-swap-did    45.234s

Future Enhancements

Planned Features

1. Multi-hop Swaps: Route through multiple pools/chains
2. Liquidity Provision: Add/remove liquidity tests
3. Limit Orders: Create and execute limit orders
4. UCAN Integration: Full delegation testing
5. Performance Tests: Load testing and benchmarks
6. Failure Recovery: Test ICA timeout handling

Contributing

When adding new tests:

1. Follow existing naming convention (Test##_Description)
2. Add helper functions to helpers.go
3. Update this README with new test documentation
4. Ensure tests are idempotent
5. Add appropriate logging for debugging

References

• Noble Documentation
• IBC Protocol
• Sonr DEX Module
• DID Module
• E2E Testing Framework