Import from root chezmoi source

cable/agents.toml

@@ -0,0 +1,67 @@
+[metadata]
+name = "agents"
+description = """
+AI coding agent CLIs found on PATH. Enter starts the agent's TUI in the current
+directory.
+"""
+requirements = []
+
+# Entries are "<name + description>\t<launch command>\t<binary>". Only agents
+# whose binary resolves on PATH are listed; add a row to the table to support
+# another one. The launch command may carry flags (claude, as in `ai`).
+[source]
+command = '''
+while IFS='|' read -r bin cmd desc; do
+  command -v "$bin" >/dev/null 2>&1 &&
+    printf '%-13s %s\t%s\t%s\n' "$bin" "$desc" "$cmd" "$bin"
+done <<'EOF'
+omp|omp|oh-my-pi coding agent
+claude|claude --dangerously-skip-permissions|Claude Code (Anthropic)
+codex|codex|Codex CLI (OpenAI)
+opencode|opencode|OpenCode (sst)
+crush|crush|Crush (Charm)
+pi|pi|pi coding agent
+cursor-agent|cursor-agent|Cursor Agent CLI
+copilot|copilot|GitHub Copilot CLI
+gemini|gemini|Gemini CLI (Google)
+agy|agy|Antigravity CLI (Google)
+grok|grok|Grok CLI (xAI)
+muse|muse|Muse Code (Meta)
+ori|ori|Ori (OpenRouter)
+hermes|hermes|Hermes Agent (Nous Research)
+amp|amp|Amp (Sourcegraph)
+droid|droid|Droid (Factory)
+qwen|qwen|Qwen Code (Alibaba)
+kimi|kimi|Kimi CLI (Moonshot)
+goose|goose|goose (Block)
+aider|aider|aider
+auggie|auggie|Auggie (Augment Code)
+kiro-cli|kiro-cli|Kiro CLI (AWS)
+cn|cn|Continue CLI
+fractal|fractal|fractal
+EOF
+'''
+shell = "bash"
+display = "{split:\\t:0}"
+output = "{split:\\t:1}"
+
+[preview]
+command = '''
+p=$(command -v '{split:\t:2}')
+printf 'command   %s\npath      %s\n' '{split:\t:1}' "$p"
+r=$(readlink -f "$p")
+[ "$r" != "$p" ] && printf 'resolves  %s\n' "$r"
+# ~/.local/bin wrappers install the agent through mise on first run.
+tool=$(grep -o 'mise x "[^"]*"' "$r" 2>/dev/null | cut -d'"' -f2)
+[ -n "$tool" ] && printf 'mise      %s\n' "$tool"
+'''
+shell = "bash"
+
+[keybindings]
+enter = "actions:launch"
+
+[actions.launch]
+description = "Start the agent's TUI"
+command = "{split:\\t:1}"
+shell = "bash"
+mode = "execute"

cable/alias.toml

@@ -0,0 +1,17 @@
+[metadata]
+name = "alias"
+description = "A channel to select from shell aliases"
+
+[source]
+# you may need to adjust the command depending on your shell
+command = "$SHELL -ic 'alias'"
+output = "{split:=:0}"
+
+[preview]
+command = "$SHELL -ic 'alias' | grep -E '^(alias )?{split:=:0}='"
+
+[ui.preview_panel]
+border_type = "none"
+scrollbar = false
+padding = { left = 2, right = 1, top = 0, bottom = 0 }
+size = 30

cable/bash-history.toml

@@ -0,0 +1,9 @@
+[metadata]
+name = "bash-history"
+description = "A channel to select from your bash history"
+requirements = ["bash"]
+
+[source]
+command = "sed '1!G;h;$!d' ${HISTFILE:-${HOME}/.bash_history} | awk '!seen[$0]++'"
+no_sort = true
+frecency = false

cable/brew-packages.toml

@@ -0,0 +1,30 @@
+[metadata]
+name = "brew-packages"
+description = "List and manage Homebrew packages"
+requirements = ["brew"]
+
+[source]
+command = [
+  { name = "Formulae", run = "brew list --formula" },
+  { name = "Casks",    run = "brew list --cask" },
+]
+
+[preview]
+command = "brew info '{}'"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+ctrl-u = "actions:upgrade"
+ctrl-d = "actions:uninstall"
+
+[actions.upgrade]
+description = "Upgrade the selected package"
+command = "brew upgrade {}"
+mode = "execute"
+
+[actions.uninstall]
+description = "Uninstall the selected package"
+command = "brew uninstall {}"
+mode = "execute"

cable/cargo-commands.toml

@@ -0,0 +1,22 @@
+[metadata]
+name = "cargo-commands"
+description = "List available cargo commands and extensions"
+requirements = ["cargo"]
+
+[source]
+command = "cargo --list 2>/dev/null | tail -n +2 | awk '{print $1}'"
+
+[preview]
+command = "cargo {} --help 2>/dev/null | head -50"
+
+[ui]
+layout = "portrait"
+preview_panel = { size = 60, border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[keybindings]
+enter = "actions:run"
+
+[actions.run]
+description = "Run the selected cargo command"
+command = "cargo {}"
+mode = "execute"

cable/cargo-crates.toml

@@ -0,0 +1,17 @@
+[metadata]
+name = "cargo-crates"
+description = "List installed cargo crates"
+requirements = ["cargo"]
+
+[source]
+command = "cargo install --list 2>/dev/null | grep -v '^    ' | sed 's/:$//'"
+display = "{split: :0} {split: :1}"
+output = "{split: :0}"
+
+[preview]
+command = "cargo install --list 2>/dev/null | sed -n '/^{split: :0} /,/^[^ ]/p' | head -20"
+
+[actions.uninstall]
+description = "Uninstall the selected crate"
+command = "cargo uninstall '{split: :0}'"
+mode = "execute"

cable/channels.toml

@@ -0,0 +1,19 @@
+[metadata]
+name = "channels"
+description = "Select a television channel"
+requirements = ["tv", "bat"]
+
+[source]
+command = ["tv list-channels"]
+
+[preview]
+command = "bat -pn --color always ${TELEVISION_CONFIG:-${XDG_CONFIG_HOME:-$HOME/.config}/television}/cable/{}.toml"
+shell = "bash"
+
+[keybindings]
+enter = "actions:channel-enter"
+
+[actions.channel-enter]
+description = "Enter a television channel"
+command = "tv {} --inline"
+mode = "execute"

cable/crontab.toml

@@ -0,0 +1,20 @@
+[metadata]
+name = "crontab"
+description = "List and manage crontab entries"
+
+[source]
+command = "crontab -l 2>/dev/null | grep -v '^#' | grep -v '^$'"
+no_sort = true
+frecency = false
+
+[preview]
+command = '''echo 'Schedule: {split: :..5}' && echo '' && echo 'Command:' && echo '{split: :5..}' '''
+
+[ui]
+layout = "portrait"
+preview_panel = { size = 30, border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[actions.edit]
+description = "Open crontab for editing"
+command = "crontab -e"
+mode = "execute"

cable/dirs.toml

@@ -0,0 +1,26 @@
+[metadata]
+name = "dirs"
+description = "A channel to select from directories"
+requirements = ["fd"]
+
+[source]
+command = [
+  { name = "Default", run = "fd -t d" },
+  { name = "Hidden",  run = "fd -t d --hidden" },
+]
+
+[preview]
+command = "ls -la --color=always '{}'"
+
+[keybindings]
+shortcut = "f2"
+
+[actions.cd]
+description = "Open a shell in the selected directory"
+command = "cd {} && $SHELL"
+mode = "execute"
+
+[actions.goto_parent_dir]
+description = "Re-opens tv in the parent directory"
+command = "tv dirs .. --inline"
+mode = "execute"

cable/docker-compose.toml

@@ -0,0 +1,32 @@
+[metadata]
+name = "docker-compose"
+description = "Manage Docker Compose services"
+requirements = ["docker"]
+
+[source]
+command = "docker compose ps --format '{{.Name}}\t{{.Service}}\t{{.Status}}'"
+display = "{split:\t:1} ({split:\t:2})"
+output = "{split:\t:1}"
+
+[preview]
+command = "docker compose logs --tail=30 --no-log-prefix '{split:\t:1}'"
+
+[actions.up]
+description = "Start the selected service"
+command = "docker compose up -d '{split:\t:1}'"
+mode = "fork"
+
+[actions.down]
+description = "Stop and remove the selected service"
+command = "docker compose down '{split:\t:1}'"
+mode = "fork"
+
+[actions.restart]
+description = "Restart the selected service"
+command = "docker compose restart '{split:\t:1}'"
+mode = "fork"
+
+[actions.logs]
+description = "Follow logs of the selected service"
+command = "docker compose logs -f '{split:\t:1}'"
+mode = "execute"

cable/docker-containers.toml

@@ -0,0 +1,56 @@
+[metadata]
+name = "docker-containers"
+description = "List and manage Docker containers"
+requirements = ["docker", "jq"]
+
+[source]
+command = [
+  { name = "Running", run = "docker ps --format '{{.Names}}\\t{{.Image}}\\t{{.Status}}'" },
+  { name = "All",     run = "docker ps -a --format '{{.Names}}\\t{{.Image}}\\t{{.Status}}'" },
+]
+display = "{split:\\t:0} ({split:\\t:2})"
+output = "{split:\\t:0}"
+
+[preview]
+command = "docker inspect '{split:\\t:0}' | jq -C '.[0] | {Name, State, Config: {Image: .Config.Image, Cmd: .Config.Cmd}, NetworkSettings: {IPAddress: .NetworkSettings.IPAddress}}'"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+ctrl-s = "actions:start"
+f2 = "actions:stop"
+ctrl-r = "actions:restart"
+ctrl-l = "actions:logs"
+ctrl-e = "actions:exec"
+ctrl-d = "actions:remove"
+
+[actions.start]
+description = "Start the selected container"
+command = "docker start '{split:\\t:0}'"
+mode = "fork"
+
+[actions.stop]
+description = "Stop the selected container"
+command = "docker stop '{split:\\t:0}'"
+mode = "fork"
+
+[actions.restart]
+description = "Restart the selected container"
+command = "docker restart '{split:\\t:0}'"
+mode = "fork"
+
+[actions.logs]
+description = "Follow logs of the selected container"
+command = "docker logs -f '{split:\\t:0}'"
+mode = "execute"
+
+[actions.exec]
+description = "Execute shell in the selected container"
+command = "docker exec -it '{split:\\t:0}' /bin/sh"
+mode = "execute"
+
+[actions.remove]
+description = "Remove the selected container"
+command = "docker rm '{split:\\t:0}'"
+mode = "execute"

cable/docker-images.toml

@@ -0,0 +1,34 @@
+[metadata]
+name = "docker-images"
+description = "A channel to select from Docker images"
+requirements = ["docker", "jq"]
+
+[source]
+command = "docker images --format '{{.Repository}}:{{.Tag}} {{.ID}}'"
+output = "{split: :-1}"
+
+[preview]
+command = "docker image inspect '{split: :-1}' | jq -C"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+ctrl-r = "actions:run"
+ctrl-d = "actions:remove"
+ctrl-s = "actions:shell"
+
+[actions.run]
+description = "Run a container from the selected image"
+command = "docker run -it '{split: :-1}'"
+mode = "execute"
+
+[actions.shell]
+description = "Run a shell in the selected image"
+command = "docker run -it '{split: :-1}' /bin/sh"
+mode = "execute"
+
+[actions.remove]
+description = "Remove the selected image"
+command = "docker rmi '{split: :-1}'"
+mode = "execute"

cable/docker-networks.toml

@@ -0,0 +1,20 @@
+[metadata]
+name = "docker-networks"
+description = "List and manage Docker networks"
+requirements = ["docker", "jq"]
+
+[source]
+command = "docker network ls --format '{{.Name}}\t{{.Driver}}\t{{.Scope}}'"
+display = "{split:\t:0} ({split:\t:1}, {split:\t:2})"
+output = "{split:\t:0}"
+
+[preview]
+command = "docker network inspect '{split:\t:0}' | jq -C '.[0] | {Name, Driver, Scope, IPAM, Containers: (.Containers // {} | to_entries | map({name: .value.Name, ipv4: .value.IPv4Address}))}'"
+
+[ui]
+layout = "portrait"
+
+[actions.remove]
+description = "Remove the selected network"
+command = "docker network rm '{split:\t:0}'"
+mode = "execute"

cable/docker-volumes.toml

@@ -0,0 +1,25 @@
+[metadata]
+name = "docker-volumes"
+description = "List and manage Docker volumes"
+requirements = ["docker", "jq"]
+
+[source]
+command = "docker volume ls --format '{{.Name}}\t{{.Driver}}'"
+display = "{split:\t:0} ({split:\t:1})"
+output = "{split:\t:0}"
+
+[preview]
+command = "docker volume inspect '{split:\t:0}' | jq -C '.[0]'"
+
+[ui]
+layout = "portrait"
+
+[actions.remove]
+description = "Remove the selected volume"
+command = "docker volume rm '{split:\t:0}'"
+mode = "execute"
+
+[actions.inspect]
+description = "Inspect the selected volume in a pager"
+command = "docker volume inspect '{split:\t:0}' | jq -C '.[0]' | less -R"
+mode = "execute"

cable/dotfiles.toml

@@ -0,0 +1,19 @@
+[metadata]
+name = "dotfiles"
+description = "A channel to select from your user's dotfiles"
+requirements = ["fd", "bat"]
+
+[source]
+command = "fd -t f . $HOME/.config"
+
+[preview]
+command = "bat -n --color=always '{}'"
+
+[keybindings]
+enter = "actions:edit"
+
+[actions.edit]
+description = "Edit the selected dotfile"
+command = "${EDITOR:-vim} {}"
+shell = "bash"
+mode = "execute"

cable/downloads.toml

@@ -0,0 +1,31 @@
+[metadata]
+name = "downloads"
+description = "Browse recent files in Downloads folder"
+requirements = ["fd", "bat"]
+
+[source]
+command = "fd -t f . ~/Downloads 2>/dev/null | head -200"
+
+[preview]
+command = "bat -n --color=always '{}' 2>/dev/null || file '{}'"
+env = { BAT_THEME = "ansi" }
+
+[keybindings]
+enter = "actions:open"
+ctrl-d = "actions:delete"
+ctrl-m = "actions:move"
+
+[actions.open]
+description = "Open the selected file with default application"
+command = "xdg-open {} 2>/dev/null || open {}"
+mode = "fork"
+
+[actions.delete]
+description = "Delete the selected file"
+command = "rm -i {}"
+mode = "execute"
+
+[actions.move]
+description = "Move the selected file to current directory"
+command = "mv {} ."
+mode = "fork"

cable/env.toml

@@ -0,0 +1,22 @@
+[metadata]
+name = "env"
+description = "A channel to select from environment variables"
+
+[source]
+command = "printenv"
+output = "{split:=:1..}" # output the value
+
+[preview]
+command = "echo '{split:=:1..}'"
+
+[ui]
+layout = "portrait"
+preview_panel = { size = 20, header = "{split:=:0}", border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[keybindings]
+shortcut = "f3"
+
+[actions.name]
+description = "Output the variable name instead of the value"
+command = "echo '{split:=:0}'"
+mode = "execute"

cable/files.toml

@@ -0,0 +1,33 @@
+[metadata]
+name = "files"
+description = "A channel to select files and directories"
+requirements = ["fd", "bat", "mtime-sort"]
+
+# Most recently modified first; tv ranks matches and frecency on top.
+[source]
+command = [
+  { name = "Default", run = "fd -t f | mtime-sort" },
+  { name = "Hidden",  run = "fd -t f -H | mtime-sort" },
+]
+shell = "bash"
+
+[preview]
+command = "bat -n --color=always '{}'"
+env = { BAT_THEME = "ansi" }
+
+# ctrl-e (edit) and ctrl-h (goto_parent_dir) are bound in config.toml.
+[keybindings]
+shortcut = "f1"
+[actions.edit]
+description = "Opens the selected entries in nvim"
+# Redirect to the tty: the fish ctrl-t binding runs tv inside a command
+# substitution, so stdout is a pipe there.
+command = "nvim {} </dev/tty >/dev/tty"
+shell = "bash"
+# use `mode = "fork"` if you want to return to tv afterwards
+mode = "execute"
+
+[actions.goto_parent_dir]
+description = "Re-opens tv in the parent directory"
+command = "tv files .. --inline"
+mode = "execute"

cable/fish-history.toml

@@ -0,0 +1,9 @@
+[metadata]
+name = "fish-history"
+description = "A channel to select from your fish history"
+requirements = ["fish"]
+
+[source]
+command = "fish -c 'history'"
+no_sort = true
+frecency = false

cable/fonts.toml

@@ -0,0 +1,16 @@
+[metadata]
+name = "fonts"
+description = "List installed system fonts"
+requirements = ["fc-list"]
+
+[source]
+command = "fc-list --format='%{family}\n' | sort -uf"
+
+[preview]
+command = "fc-list '{}' --format='%{file}\n%{style}\n%{family}\n' | head -20"
+
+[ui.preview_panel]
+border_type = "none"
+scrollbar = false
+padding = { left = 2, right = 1, top = 0, bottom = 0 }
+size = 70

cable/gh-issues.toml

@@ -0,0 +1,47 @@
+[metadata]
+name = "gh-issues"
+description = "List GitHub issues for the current repo"
+requirements = ["gh", "jq"]
+
+[source]
+command = '''gh issue list --state open --limit 100 --json number,title,createdAt,author,labels | jq -r 'sort_by(.createdAt) | reverse | .[] | "  \u001b[32m#\(.number)\u001b[39m   \(.title) \u001b[33m@\(.author.login)\u001b[39m" + (if (.labels | length) > 0 then " " + ([.labels[] | "\u001b[35m" + .name + "\u001b[39m"] | join(" ")) else "" end)'
+'''
+ansi = true
+output = "{strip_ansi|split:#:1|split: :0}"
+
+[ui]
+layout = "portrait"
+preview_panel = { header = '{strip_ansi|split:#:1|split: :0}', border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[preview]
+command = '''gh issue view '{strip_ansi|split:#:1|split:   :0}' --json number,title,body,state,author,createdAt,updatedAt,labels,assignees | jq -r '
+"  " + .title,
+"  #" + (.number | tostring),
+"",
+"  \u001b[36mStatus:\u001b[39m \u001b[32m" + .state + "\u001b[39m",
+"  \u001b[36mAuthor:\u001b[39m \u001b[33m" + .author.login + "\u001b[39m",
+"  \u001b[36mCreated:\u001b[39m " + (.createdAt | fromdateiso8601 | (now - .) | if . < 3600 then (./60|floor|tostring) + " minutes ago" elif . < 86400 then (./3600|floor|tostring) + " hours ago" else (./86400|floor|tostring) + " days ago" end),
+"  \u001b[36mUpdated:\u001b[39m " + (.updatedAt | fromdateiso8601 | (now - .) | if . < 3600 then (./60|floor|tostring) + " minutes ago" elif . < 86400 then (./3600|floor|tostring) + " hours ago" else (./86400|floor|tostring) + " days ago" end),
+(if (.labels | length) > 0 then "  \u001b[36mLabels:\u001b[39m " + ([.labels[] | "\u001b[35m" + .name + "\u001b[39m"] | join(" ")) else "" end),
+(if (.assignees | length) > 0 then "  \u001b[36mAssignees:\u001b[39m " + ([.assignees[].login] | join(", ")) else "" end),
+"",
+"  \u001b[90m────────────────────────────────────────────────────────────\u001b[39m",
+"",
+(.body // "")'
+'''
+
+[actions.open]
+description = "Open the issue in the browser"
+command = "gh issue view {strip_ansi|split:#:1|split: :0} --web"
+mode = "fork"
+
+[actions.close]
+description = "Close the selected issue"
+command = "gh issue close {strip_ansi|split:#:1|split: :0}"
+mode = "fork"
+
+[actions.comment]
+description = "Add a comment to the selected issue"
+command = "gh issue comment {strip_ansi|split:#:1|split: :0}"
+mode = "execute"
+

cable/gh-prs.toml

@@ -0,0 +1,52 @@
+[metadata]
+name = "gh-prs"
+description = "List GitHub PRs for the current repo"
+requirements = ["gh", "jq"]
+
+[source]
+command = '''gh pr list --state open --limit 100 --json number,title,createdAt,author,labels | jq -r 'sort_by(.createdAt) | reverse | .[] | "  \u001b[32m#\(.number)\u001b[39m   \(.title) \u001b[33m@\(.author.login)\u001b[39m" + (if (.labels | length) > 0 then " " + ([.labels[] | "\u001b[35m" + .name + "\u001b[39m"] | join(" ")) else "" end)'
+'''
+output = '{strip_ansi|split:#:1|split:   :0}'
+ansi = true
+
+[ui]
+layout = "portrait"
+
+[preview]
+command = '''gh pr view '{strip_ansi|split:#:1|split:   :0}' --json number,title,body,state,headRefName,baseRefName,author,createdAt,updatedAt,mergeable,changedFiles,additions,deletions,labels,assignees,reviewDecision,headRepository,headRepositoryOwner | jq -r '
+"  " + .title,
+"  #" + (.number | tostring),
+"",
+"  \u001b[36mStatus:\u001b[39m \u001b[32m" + .state + "\u001b[39m  " + .baseRefName + " ← " + .headRefName,
+"  \u001b[36mRepo:\u001b[39m \u001b[34m" + (.headRepositoryOwner.login) + "/" + (.headRepository.name) + "\u001b[39m",
+"  \u001b[36mAuthor:\u001b[39m \u001b[33m" + .author.login + "\u001b[39m",
+"  \u001b[36mCreated:\u001b[39m " + (.createdAt | fromdateiso8601 | (now - .) | if . < 3600 then (./60|floor|tostring) + " minutes ago" elif . < 86400 then (./3600|floor|tostring) + " hours ago" else (./86400|floor|tostring) + " days ago" end),
+"  \u001b[36mUpdated:\u001b[39m " + (.updatedAt | fromdateiso8601 | (now - .) | if . < 3600 then (./60|floor|tostring) + " minutes ago" elif . < 86400 then (./3600|floor|tostring) + " hours ago" else (./86400|floor|tostring) + " days ago" end),
+(if (.labels | length) > 0 then "  \u001b[36mLabels:\u001b[39m " + ([.labels[] | "\u001b[35m" + .name + "\u001b[39m"] | join(" ")) else "" end),
+"  \u001b[36mMerge Status:\u001b[39m " + (if .mergeable == "MERGEABLE" then "\u001b[32m✓ Clean\u001b[39m" elif .mergeable == "CONFLICTING" then "\u001b[31m✗ Dirty\u001b[39m" else "\u001b[33m? Unknown\u001b[39m" end),
+"  \u001b[36mChanges:\u001b[39m " + (.changedFiles | tostring) + " files  \u001b[32m+" + (.additions | tostring) + "\u001b[39m \u001b[31m-" + (.deletions | tostring) + "\u001b[39m",
+"",
+"  \u001b[90m────────────────────────────────────────────────────────────\u001b[39m",
+"",
+(.body // "")'
+'''
+
+[actions.open]
+description = "Open the PR in the browser"
+command = "gh pr view {strip_ansi|split:#:1|split:   :0} --web"
+mode = "execute"
+
+[actions.checkout]
+description = "Checkout the PR branch locally"
+command = "gh pr checkout {strip_ansi|split:#:1|split:   :0}"
+mode = "execute"
+
+[actions.merge]
+description = "Merge the selected PR"
+command = "gh pr merge {strip_ansi|split:#:1|split:   :0}"
+mode = "execute"
+
+[actions.diff]
+description = "View the PR diff"
+command = "gh pr diff {strip_ansi|split:#:1|split:   :0} | less"
+mode = "execute"

cable/ghq-repos.toml

@@ -0,0 +1,87 @@
+[metadata]
+name = "ghq-repos"
+description = """
+ghq repositories (plus the chezmoi source tree) and Obsidian vaults, newest
+git activity first. Enter prints the directory; the gho shell function (ctrl-o
+in fish, zsh and bash) cds into it.
+"""
+requirements = ["ghq", "fd", "git", "serie", "onefetch", "mtime-sort"]
+
+# Entries are "<name>\t<absolute path>": the name is what you fuzzy-match, the
+# path is what enter prints. ctrl-s cycles repos → vaults.
+[source]
+command = [
+  { name = "Repos", run = '''
+root=$(ghq root)
+{
+  # Checkouts living outside ghq root, listed first so they win over a ghq
+  # clone of the same repo: chezmoi's source (github.com/prdlk/dotfiles) and
+  # the nvim config (github.com/prdlk/nvim).
+  c=$HOME/.local/share/chezmoi
+  [ -d "$c/.git" ] && printf 'github.com/prdlk/dotfiles\t%s\n' "$c"
+  n=$HOME/.config/nvim
+  [ -d "$n/.git" ] && printf 'github.com/prdlk/nvim\t%s\n' "$n"
+  ghq list | awk -v r="$root" '{ print $0 "\t" r "/" $0 }'
+} | awk -F '\t' '!seen[$1]++' | mtime-sort --repo
+''' },
+  { name = "Vaults", run = '''
+v=$HOME/Documents/Obsidian
+fd -H -t d -d 3 '^\.obsidian$' "$v" -x dirname |
+  awk -v r="$v/" '{ print substr($0, length(r) + 1) "\t" $0 }' |
+  mtime-sort
+''' },
+]
+shell = "bash"
+display = "{split:\\t:0}"
+output = "{split:\\t:1}"
+
+# Two previews, ctrl-f cycles: commit graph (default), then onefetch. serie
+# itself cannot draw here -- it is a fullscreen TUI that paints the graph with
+# kitty images and has no print mode -- so ctrl-g (history) opens it.
+[preview]
+command = [
+  '''
+d='{split:\t:1}'
+if [ -e "$d/.git" ]; then
+  git -C "$d" log --graph --all --color=always --date=relative -n 300 \
+    --format='%C(yellow)%h%C(reset) %C(blue)%<(12,trunc)%ad%C(reset) %s%C(auto)%d' 2>&1
+else
+  eza --tree --level 2 --color=always "$d" 2>/dev/null || ls -la "$d"
+fi
+''',
+  '''
+d='{split:\t:1}'
+if [ -e "$d/.git" ]; then
+  onefetch --no-art "$d" 2>&1
+else
+  eza --tree --level 2 --color=always "$d" 2>/dev/null || ls -la "$d"
+fi
+''',
+]
+shell = "bash"
+
+# ctrl-e (edit) is bound globally in config.toml.
+[keybindings]
+ctrl-b = "actions:browse"
+ctrl-g = "actions:history"
+
+[actions.edit]
+description = "Open the repository in nvim"
+# /dev/tty: the gho wrapper captures tv's stdout to read the picked path.
+command = "cd '{split:\\t:1}' && nvim . </dev/tty >/dev/tty"
+shell = "bash"
+mode = "execute"
+
+[actions.browse]
+description = "Open the repository's web page (gop)"
+command = "cd '{split:\\t:1}' && gop >/dev/null 2>&1"
+shell = "bash"
+mode = "fork"
+
+[actions.history]
+description = "Browse the commit graph in serie"
+# Fork: quitting serie (q) returns to the picker. /dev/tty for the same reason
+# as edit; serie also needs a real tty to detect kitty graphics.
+command = "cd '{split:\\t:1}' && [ -e .git ] && serie </dev/tty >/dev/tty"
+shell = "bash"
+mode = "fork"

cable/git-branch.toml

@@ -0,0 +1,37 @@
+[metadata]
+name = "git-branch"
+description = "A channel to select from git branches"
+requirements = ["git"]
+
+[source]
+command = "git --no-pager branch --all --format=\"%(refname:short)\""
+output = "{split: :0}"
+
+[preview]
+command = "git show -p --stat --pretty=fuller --color=always '{0}'"
+
+[keybindings]
+enter = "actions:checkout"
+ctrl-d = "actions:delete"
+ctrl-m = "actions:merge"
+ctrl-r = "actions:rebase"
+
+[actions.checkout]
+description = "Checkout the selected branch"
+command = "git checkout '{0}'"
+mode = "execute"
+
+[actions.delete]
+description = "Delete the selected branch"
+command = "git branch -d '{0}'"
+mode = "execute"
+
+[actions.merge]
+description = "Merge the selected branch into current branch"
+command = "git merge '{0}'"
+mode = "execute"
+
+[actions.rebase]
+description = "Rebase current branch onto the selected branch"
+command = "git rebase '{0}'"
+mode = "execute"

cable/git-deletions.toml

@@ -0,0 +1,24 @@
+[metadata]
+name = "git-deletions"
+description = "A channel to list files which were deleted from the Git repository"
+requirements = ["git", "rg", "bat"]
+
+[source]
+command = "git log --diff-filter=D --summary | rg 'delete mode \\d+' -r '' --trim"
+
+[preview]
+command = ["git show \"$(git rev-list -n1 HEAD -- '{}')^:{}\" | bat -n --color always --file-name '{}'", "git show --summary \"$(git rev-list -n1 HEAD -- '{}')\""]
+
+[keybindings]
+enter = "actions:print_commit"
+ctrl-r = "actions:restore_file"
+
+[actions.print_commit]
+description = "Print the latest commit where file was deleted"
+command = "echo \"$(git rev-list -n1 HEAD -- {})\""
+mode = "execute"
+
+[actions.restore_file]
+description = "Restore the selected file"
+command = "git checkout \"$(git rev-list -n1 HEAD -- {})^\" -- {}"
+

cable/git-diff.toml

@@ -0,0 +1,34 @@
+[metadata]
+name = "git-diff"
+description = "A channel to select files from git diff commands"
+requirements = ["git"]
+
+[source]
+command = "git diff --name-only HEAD"
+
+[preview]
+command = "git diff HEAD --color=always -- '{}'"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+ctrl-s = "actions:stage"
+ctrl-r = "actions:restore"
+ctrl-e = "actions:edit"
+
+[actions.stage]
+description = "Stage the selected file"
+command = "git add {}"
+mode = "fork"
+
+[actions.restore]
+description = "Discard changes in the selected file"
+command = "git restore {}"
+mode = "fork"
+
+[actions.edit]
+description = "Open the selected file in editor"
+command = "${EDITOR:-vim} {}"
+shell = "bash"
+mode = "execute"

cable/git-files.toml

@@ -0,0 +1,35 @@
+[metadata]
+name = "git-files"
+description = """
+Files tracked in the current git repository, most recently modified first
+(all files under the cwd outside a repo). Enter opens the selection in nvim;
+bound to ctrl-e in fish, zsh and bash.
+"""
+requirements = ["git", "fd", "bat", "mtime-sort"]
+
+[source]
+command = [
+  { name = "Tracked", run = '''
+if top=$(git rev-parse --show-toplevel 2>/dev/null); then
+  git -c core.quotePath=false ls-files -- "$top"
+else
+  fd -t f
+fi | mtime-sort
+''' },
+  { name = "All", run = "fd -t f -H -E .git | mtime-sort" },
+]
+shell = "bash"
+
+[preview]
+command = "bat -n --color=always '{}'"
+env = { BAT_THEME = "ansi" }
+
+# ctrl-e (edit) is bound globally in config.toml.
+[keybindings]
+enter = "actions:edit"
+
+[actions.edit]
+description = "Opens the selected entries in nvim"
+command = "nvim {} </dev/tty >/dev/tty"
+shell = "bash"
+mode = "execute"

cable/git-log.toml

@@ -0,0 +1,34 @@
+[metadata]
+name = "git-log"
+description = "A channel to select from git log entries"
+requirements = ["git"]
+
+[source]
+command = "git log --graph --pretty=format:'%C(yellow)%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset' --abbrev-commit --color=always"
+output = "{strip_ansi|split: :1}"
+ansi = true
+no_sort = true
+frecency = false
+
+[preview]
+command = "git show -p --stat --pretty=fuller --color=always '{strip_ansi|split: :1}' | head -n 1000"
+
+[keybindings]
+ctrl-y = "actions:cherry-pick"
+ctrl-r = "actions:revert"
+ctrl-o = "actions:checkout"
+
+[actions.cherry-pick]
+description = "Cherry-pick the selected commit"
+command = "git cherry-pick '{strip_ansi|split: :1}'"
+mode = "execute"
+
+[actions.revert]
+description = "Revert the selected commit"
+command = "git revert '{strip_ansi|split: :1}'"
+mode = "execute"
+
+[actions.checkout]
+description = "Checkout the selected commit"
+command = "git checkout '{strip_ansi|split: :1}'"
+mode = "execute"

cable/git-reflog.toml

@@ -0,0 +1,28 @@
+[metadata]
+name = "git-reflog"
+description = "A channel to select from git reflog entries"
+requirements = ["git"]
+
+[source]
+command = "git reflog --decorate --color=always"
+output = "{0|strip_ansi}"
+ansi = true
+no_sort = true
+frecency = false
+
+[preview]
+command = "git show -p --stat --pretty=fuller --color=always '{0|strip_ansi}'"
+
+[keybindings]
+ctrl-o = "actions:checkout"
+ctrl-r = "actions:reset"
+
+[actions.checkout]
+description = "Checkout the selected reflog entry"
+command = "git checkout '{0|strip_ansi}'"
+mode = "execute"
+
+[actions.reset]
+description = "Reset --hard to the selected reflog entry"
+command = "git reset --hard '{0|strip_ansi}'"
+mode = "execute"

cable/git-remotes.toml

@@ -0,0 +1,20 @@
+[metadata]
+name = "git-remotes"
+description = "List and manage git remotes"
+requirements = ["git"]
+
+[source]
+command = "git remote"
+
+[preview]
+command = "git remote show '{}'"
+
+[actions.fetch]
+description = "Fetch from the selected remote"
+command = "git fetch {}"
+mode = "execute"
+
+[actions.remove]
+description = "Remove the selected remote"
+command = "git remote remove {}"
+mode = "execute"

cable/git-repos.toml

@@ -0,0 +1,31 @@
+[metadata]
+name = "git-repos"
+requirements = ["fd", "git"]
+description = """
+A channel to select from git repositories on your local machine.
+
+This channel uses `fd` to find directories that contain a `.git` subdirectory, and then allows you to preview the git log of the selected repository.
+"""
+
+[source]
+# this is a macos version of the command. While perfectly usable on linux, you may want to tweak it a bit.
+command = "fd -g .git -HL -t d -d 10 --prune ~ -E 'Library' -E 'Application Support' --exec dirname '{}'"
+display = "{split:/:-1}"
+
+[preview]
+command = "cd '{}'; git log -n 200 --pretty=medium --all --graph --color"
+
+[keybindings]
+enter = "actions:cd"
+ctrl-e = "actions:edit"
+
+[actions.cd]
+description = "Open a new shell in the selected repository"
+command = "cd {} && $SHELL"
+mode = "execute"
+
+[actions.edit]
+description = "Open the repository in editor"
+command = "${EDITOR:-vim} {}"
+shell = "bash"
+mode = "execute"

cable/git-stash.toml

@@ -0,0 +1,37 @@
+[metadata]
+name = "git-stash"
+description = "Browse and manage git stash entries"
+requirements = ["git"]
+
+[source]
+command = "git stash list --color=always"
+ansi = true
+output = "{strip_ansi|split:\\::0}"
+no_sort = true
+frecency = false
+
+[preview]
+command = "git stash show -p --color=always '{strip_ansi|split:\\::0}'"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+enter = "actions:apply"
+ctrl-p = "actions:pop"
+ctrl-d = "actions:drop"
+
+[actions.apply]
+description = "Apply the selected stash"
+command = "git stash apply '{strip_ansi|split:\\::0}'"
+mode = "execute"
+
+[actions.pop]
+description = "Pop the selected stash (apply and remove)"
+command = "git stash pop '{strip_ansi|split:\\::0}'"
+mode = "execute"
+
+[actions.drop]
+description = "Drop the selected stash"
+command = "git stash drop '{strip_ansi|split:\\::0}'"
+mode = "execute"

cable/git-submodules.toml

@@ -0,0 +1,20 @@
+[metadata]
+name = "git-submodules"
+description = "List and manage git submodules"
+requirements = ["git"]
+
+[source]
+command = "git submodule status | awk '{print $2}'"
+
+[preview]
+command = "git -C '{}' log --oneline -10 --color=always"
+
+[actions.update]
+description = "Update the selected submodule"
+command = "git submodule update --init --recursive {}"
+mode = "execute"
+
+[actions.sync]
+description = "Sync the selected submodule URL"
+command = "git submodule sync {}"
+mode = "execute"

cable/git-tags.toml

@@ -0,0 +1,26 @@
+[metadata]
+name = "git-tags"
+description = "Browse and checkout git tags"
+requirements = ["git"]
+
+[source]
+command = "git tag --sort=-creatordate"
+no_sort = true
+frecency = false
+
+[preview]
+command = "git show --color=always '{}'"
+
+[keybindings]
+enter = "actions:checkout"
+ctrl-d = "actions:delete"
+
+[actions.checkout]
+description = "Checkout the selected tag"
+command = "git checkout {}"
+mode = "execute"
+
+[actions.delete]
+description = "Delete the selected tag"
+command = "git tag -d {}"
+mode = "execute"

cable/git-worktrees.toml

@@ -0,0 +1,24 @@
+[metadata]
+name = "git-worktrees"
+description = "List and switch between git worktrees"
+requirements = ["git"]
+
+[source]
+command = "git worktree list --porcelain | grep '^worktree' | cut -d' ' -f2-"
+
+[preview]
+command = "cd '{}' && git log --oneline -10 --color=always && echo && git status --short"
+
+[keybindings]
+enter = "actions:cd"
+ctrl-d = "actions:remove"
+
+[actions.cd]
+description = "Change to the selected worktree"
+command = "cd {} && $SHELL"
+mode = "execute"
+
+[actions.remove]
+description = "Remove the selected worktree"
+command = "git worktree remove {}"
+mode = "execute"

cable/images.toml

@@ -0,0 +1,21 @@
+[metadata]
+name = "images"
+description = "Browse image files with preview"
+requirements = ["fd", "chafa"]
+
+[source]
+command = [
+  { name = "Default", run = "fd -t f -e png -e jpg -e jpeg -e gif -e webp -e bmp -e svg ." },
+  { name = "Hidden",  run = "fd -t f -e png -e jpg -e jpeg -e gif -e webp -e bmp -e svg -H ." },
+]
+
+[preview]
+command = "chafa -s 80x40 '{}' 2>/dev/null || file '{}'"
+
+[keybindings]
+enter = "actions:open"
+
+[actions.open]
+description = "Open the selected image with default viewer"
+command = "xdg-open {} 2>/dev/null || open {}"
+mode = "fork"

cable/jobs.toml

@@ -0,0 +1,57 @@
+[metadata]
+name = "jobs"
+description = """
+The current fish shell's background jobs (stopped or running). tv runs in a
+child process and cannot see the shell's job table, so the ctrl-z binding
+(_jobs_bind) writes it to the file named by $TV_JOBS; enter prints the job id
+and the binding runs `fg %<id>`; ctrl-d kills the job. Opened any other way,
+the list is empty.
+"""
+requirements = ["ps"]
+
+# Record: "%<id>  <state>  <command>", job id, process group (tab separated).
+# Newest job first, the order fish's `jobs` prints.
+[source]
+command = '[ -n "$TV_JOBS" ] && [ -r "$TV_JOBS" ] && cat "$TV_JOBS"'
+shell = "bash"
+display = "{split:\\t:0}"
+output = "{split:\\t:1}"
+
+[preview]
+command = '''
+pg='{split:\t:2}'
+# No other braces in this script: tv would read them as templates. procps
+# `ps -g` matches sessions, not process groups, so filter on pgid by hand.
+pids=$(ps -e -o pgid=,pid= --sort=start_time | while read -r g p; do [ "$g" = "$pg" ] && echo "$p"; done)
+if [ -z "$pids" ]; then
+  echo "process group $pg is gone"
+  exit 0
+fi
+first=$(echo "$pids" | head -n1)
+printf '\033[1mcwd\033[0m      %s\n' "$(readlink "/proc/$first/cwd" 2>/dev/null || echo '?')"
+printf '\033[1mstarted\033[0m  %s\n\n' "$(ps -o lstart= -p "$first" | sed 's/^ *//')"
+# STAT T = stopped (ctrl-z), S/R = running in the background.
+ps -o pid,stat,etime,pcpu,rss,args --forest -p "$(echo $pids | tr ' ' ,)"
+'''
+shell = "bash"
+
+[keybindings]
+ctrl-d = ["actions:kill", "reload_source"]
+
+# SIGTERM to the whole process group, then SIGCONT: a stopped job holds TERM
+# until it runs again. The row leaves $TV_JOBS only once the group is gone
+# (up to 1 s), so reload_source keeps a job that ignored TERM. No braces: tv
+# would read them as templates.
+[actions.kill]
+description = "Kill the job (SIGTERM to its process group)"
+command = '''
+pg='{split:\t:2}'
+kill -TERM -- "-$pg" 2>/dev/null
+kill -CONT -- "-$pg" 2>/dev/null
+for i in 1 2 3 4 5 6 7 8 9 10; do kill -0 -- "-$pg" 2>/dev/null || break; sleep 0.1; done
+if ! kill -0 -- "-$pg" 2>/dev/null && [ -w "$TV_JOBS" ]; then
+  awk -F '\t' -v g="$pg" '$3 != g' "$TV_JOBS" >"$TV_JOBS.new" && mv "$TV_JOBS.new" "$TV_JOBS"
+fi
+'''
+shell = "bash"
+mode = "fork"

cable/journal.toml

@@ -0,0 +1,24 @@
+[metadata]
+name = "journal"
+description = "Browse systemd journal log identifiers and their logs"
+requirements = ["journalctl"]
+
+[source]
+command = "journalctl --field SYSLOG_IDENTIFIER 2>/dev/null | sort -f"
+
+[preview]
+command = "journalctl -b --no-pager -o short-iso -n 50 SYSLOG_IDENTIFIER='{}' 2>/dev/null"
+
+[ui]
+layout = "portrait"
+preview_panel = { size = 70, border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[actions.logs]
+description = "Follow live logs for the selected identifier"
+command = "journalctl -f SYSLOG_IDENTIFIER={}"
+mode = "execute"
+
+[actions.full]
+description = "View all logs for the selected identifier in a pager"
+command = "journalctl -b --no-pager -o short-iso SYSLOG_IDENTIFIER={} | less"
+mode = "fork"

cable/just-recipes.toml

@@ -0,0 +1,18 @@
+[metadata]
+name = "just-recipes"
+description = "A channel to select recipes from Justfiles"
+requirements = ["just"]
+
+[source]
+command = ["just --summary | tr '[:blank:]' '\n'"]
+
+[preview]
+command = "just -s {}"
+
+[keybindings]
+f5 = "actions:execute-recipe"
+
+[actions.execute-recipe]
+description = "Execute a justfile recipe"
+command = "just {}"
+mode = "execute"

cable/kitty-days.toml

@@ -0,0 +1,75 @@
+[metadata]
+name = "kitty-days"
+description = """
+Daily kitty sessions saved by ~/.config/kitty/day_session.py, last modified
+first. The preview lists each tab's windows (cwd, the program restored in it)
+with the tail of its saved scrollback. Enter opens the day in a new kitty.
+"""
+requirements = ["kitty", "python3", "mtime-sort"]
+
+# Entries are "<day>  <weekday>  week of <monday>  <n> tabs\t<session file>".
+[source]
+command = '''
+for f in "$HOME"/.local/share/kitty-sessions/*/*.kitty-session; do
+  [ -e "$f" ] || continue
+  day=$(basename "$f" .kitty-session)
+  printf '%s  %s  week of %s  %s tabs\t%s\n' "$day" "$(date -d "$day" +%a)" \
+    "$(basename "$(dirname "$f")")" "$(grep -c '^new_tab' "$f")" "$f"
+done | mtime-sort
+'''
+shell = "bash"
+display = "{split:\\t:0}"
+output = "{split:\\t:1}"
+
+# The script avoids braces: tv would read them as templates.
+[preview]
+command = '''
+python3 - '{split:\t:1}' <<'PY'
+import json, os, shlex, sys
+
+FLAG = 'kitty-unserialize-data='
+home = os.path.expanduser('~')
+tab, cwd = 0, ''
+for line in open(sys.argv[1]).read().splitlines():
+    word, _, rest = line.partition(' ')
+    if word == 'new_tab':
+        tab += 1
+        print('\x1b[1mtab %d\x1b[m' % tab)
+    elif word == 'cd':
+        cwd = shlex.split(rest)[0]
+    elif word == 'launch':
+        args = shlex.split(rest)
+        data = json.loads(args.pop(0)[len(FLAG):]) if args and args[0].startswith(FLAG) else dict()
+        wcwd = next((a.partition('=')[2] for a in args if a.startswith('--cwd=')), cwd)
+        cmd = [a for a in args if not a.startswith('-')]  # kitty writes every option as --opt=value
+        dump, program = '', shlex.join(cmd)
+        for step in data.get('cmd_at_shell_startup', '').split('; '):
+            if step.startswith('cat '):
+                dump = shlex.split(step)[1]
+            elif step:
+                program = step
+        print('  \x1b[36m%s\x1b[m  %s' % (wcwd.replace(home, '~', 1), program))
+        if dump and os.path.exists(dump):
+            for l in open(dump, errors='replace').read().splitlines()[-6:]:
+                print('    ' + l + '\x1b[m')
+PY
+'''
+shell = "bash"
+
+# ctrl-e (edit) is bound globally in config.toml.
+[keybindings]
+enter = "actions:open"
+
+# Today's file, while no running kitty owns it, comes back as the live day
+# (saved again); any other day is a read-only snapshot.
+[actions.open]
+description = "Open the day in a new kitty"
+command = "setsid -f kitty --session '{split:\\t:1}' >/dev/null 2>&1"
+shell = "bash"
+mode = "execute"
+
+[actions.edit]
+description = "Open the session file in nvim"
+command = "nvim '{split:\\t:1}' </dev/tty >/dev/tty"
+shell = "bash"
+mode = "execute"

cable/make-targets.toml

@@ -0,0 +1,18 @@
+[metadata]
+name = "make-targets"
+description = "List and run Makefile targets"
+requirements = ["make", "awk"]
+
+[source]
+command = "make -pRrq 2>/dev/null | awk -F: '/^[a-zA-Z0-9][^$#\\/\\t=]*:([^=]|$)/ {split($1,a,\" \"); print a[1]}' | sort -u | grep -v '^Makefile$'"
+
+[preview]
+command = "awk '/^{}[[:space:]]*:/{found=1} found{print; if(/^[^\\t]/ && NR>1 && !/^{}[[:space:]]*:/) exit}' Makefile"
+
+[keybindings]
+enter = "actions:run"
+
+[actions.run]
+description = "Run the selected make target"
+command = "make {}"
+mode = "execute"

cable/man-pages.toml

@@ -0,0 +1,25 @@
+[metadata]
+name = "man-pages"
+description = "Browse and preview system manual pages"
+requirements = ["apropos", "man"]
+
+[source]
+# List all man pages using apropos
+command = "apropos ."
+
+[preview]
+# Show the man page for the selected entry
+command = "man '{0}'"
+env = { "MANWIDTH" = "80" }
+
+[keybindings]
+enter = "actions:open"
+
+[actions.open]
+description = "Open the selected man page in the system pager"
+command = "man '{0}'"
+mode = "execute"
+
+[ui]
+layout = "portrait"
+preview_panel = { header = "{0}", border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }

cable/mounts.toml

@@ -0,0 +1,19 @@
+[metadata]
+name = "mounts"
+description = "List mounted filesystems"
+requirements = ["df", "awk"]
+
+[source]
+command = "df -h --output=target,fstype,size,used,avail,pcent 2>/dev/null | tail -n +2"
+display = "{split: :0}"
+
+[preview]
+command = "df -h '{}' && echo && ls -la '{}' 2>/dev/null | head -20"
+
+[keybindings]
+enter = "actions:cd"
+
+[actions.cd]
+description = "Open a shell in the selected mount point"
+command = "cd {} && $SHELL"
+mode = "execute"

cable/node-packages.toml

@@ -0,0 +1,21 @@
+[metadata]
+name = "node-packages"
+description = "Browse local node_modules dependencies"
+requirements = ["node"]
+
+[source]
+command = "ls -d node_modules/*/ 2>/dev/null | sed 's|node_modules/||;s|/$||' | grep -v '^\\.'"
+output = "{}"
+
+[preview]
+command = "cat 'node_modules/{}/package.json' 2>/dev/null | jq -C '{name, version, description, license, homepage, main}'"
+
+[actions.readme]
+description = "View the package README"
+command = "cat node_modules/{}/README.md 2>/dev/null | less"
+mode = "execute"
+
+[actions.homepage]
+description = "Open the package homepage"
+command = "node -e \"const p=require('./node_modules/{}/package.json'); const u=p.homepage||'https://www.npmjs.com/package/'+p.name; require('child_process').exec('xdg-open '+u)\""
+mode = "fork"

cable/npm-packages.toml

@@ -0,0 +1,20 @@
+[metadata]
+name = "npm-packages"
+description = "List globally installed npm packages"
+requirements = ["npm"]
+
+[source]
+command = "npm list -g --depth=0 --parseable 2>/dev/null | tail -n +2 | xargs -I{} basename {}"
+
+[preview]
+command = "npm info '{}' 2>/dev/null | head -30"
+
+[actions.uninstall]
+description = "Uninstall the selected global package"
+command = "npm uninstall -g {}"
+mode = "execute"
+
+[actions.update]
+description = "Update the selected global package"
+command = "npm update -g {}"
+mode = "execute"

cable/npm-scripts.toml

@@ -0,0 +1,25 @@
+[metadata]
+name = "npm-scripts"
+description = "List and run npm scripts from package.json"
+requirements = ["jq"]
+
+[source]
+command = "jq -r '.scripts | to_entries[] | \"\\(.key)\\t\\(.value)\"' package.json 2>/dev/null"
+display = "{split:\\t:0}"
+
+[preview]
+command = "jq -r '.scripts[\"{split:\\t:0}\"]' package.json"
+
+[ui.preview_panel]
+border_type = "none"
+scrollbar = false
+padding = { left = 2, right = 1, top = 0, bottom = 0 }
+size = 30
+
+[keybindings]
+enter = "actions:run"
+
+[actions.run]
+description = "Run the selected npm script"
+command = "npm run '{split:\\t:0}'"
+mode = "execute"

cable/nu-history.toml

@@ -0,0 +1,9 @@
+
+[metadata]
+name = "nu-history"
+description = "A channel to select from your nu history"
+
+[source]
+command = "nu -c 'open $nu.history-path | lines | uniq | reverse | to text'"
+no_sort = true
+frecency = false

cable/obsidian.toml

@@ -0,0 +1,66 @@
+[metadata]
+name = "obsidian"
+description = """
+Obsidian vaults under ~/Documents/Obsidian, most recently modified first.
+Enter opens the vault in Obsidian; vaults Obsidian has never opened are
+registered in obsidian.json first.
+"""
+requirements = ["fd", "jq", "eza", "obsidian", "xdg-open", "mtime-sort"]
+
+# Entries are "<name>\t<absolute path>": the name is what you fuzzy-match, the
+# path is what the actions use.
+[source]
+command = '''
+v=$HOME/Documents/Obsidian
+fd -H -t d -d 3 '^\.obsidian$' "$v" -x dirname |
+  awk -v r="$v/" '{ print substr($0, length(r) + 1) "\t" $0 }' |
+  mtime-sort
+'''
+shell = "bash"
+display = "{split:\\t:0}"
+output = "{split:\\t:1}"
+
+[preview]
+command = "eza --tree --level 2 --color=always '{split:\\t:1}' 2>/dev/null || ls -la '{split:\\t:1}'"
+shell = "bash"
+
+# ctrl-e (edit) is bound globally in config.toml.
+[keybindings]
+enter = "actions:open"
+
+# obsidian://open?path= only resolves vaults listed in obsidian.json, and
+# Obsidian reads that file once at startup and rewrites it from memory. An
+# unlisted vault is therefore added only while Obsidian is closed; while it
+# runs, the vault switcher opens instead.
+[actions.open]
+description = "Open the vault in Obsidian"
+command = '''
+d='{split:\t:1}'
+cfg=${XDG_CONFIG_HOME:-$HOME/.config}/obsidian/obsidian.json
+uri="obsidian://open?path=$(jq -rn --arg p "$d" '$p | @uri')"
+if ! jq -e --arg p "$d" 'any(.vaults[]?; .path == $p)' "$cfg" >/dev/null 2>&1; then
+  # [o]: keep pgrep from matching this script's own command line.
+  if pgrep -f '[o]bsidian/app.asar' >/dev/null; then
+    msg="Vault not registered and Obsidian is running: use 'Open folder as vault' for $d"
+    echo "$msg" >&2
+    notify-send Obsidian "$msg" 2>/dev/null
+    uri="obsidian://choose-vault"
+  else
+    mkdir -p "${cfg%/*}"
+    [ -s "$cfg" ] || echo '{}' >"$cfg"
+    tmp=$(mktemp "$cfg.XXXXXX") || exit 1
+    jq --arg id "$(od -An -N8 -tx1 /dev/urandom | tr -d ' \n')" --arg p "$d" \
+      --argjson ts "$(date +%s%3N)" '.vaults[$id] = {path: $p, ts: $ts}' \
+      "$cfg" >"$tmp" && mv "$tmp" "$cfg" || rm -f "$tmp"
+  fi
+fi
+setsid -f xdg-open "$uri" >/dev/null 2>&1
+'''
+shell = "bash"
+mode = "execute"
+
+[actions.edit]
+description = "Open the vault in nvim"
+command = "cd '{split:\\t:1}' && nvim . </dev/tty >/dev/tty"
+shell = "bash"
+mode = "execute"

cable/omp-sessions.toml

@@ -0,0 +1,38 @@
+[metadata]
+name = "omp-sessions"
+description = """
+omp sessions of the current git repo, newest first: age, the branch HEAD was
+on when the session was last written, and the title. The preview is the
+conversation's message text; enter resumes the session, ctrl-n starts a new
+one instead. Listing, preview, resume and new live in ~/.local/bin/omp-session,
+whose launcher (ctrl-a in fish and zsh) opens this cable when it has no
+session to resume on the default branch.
+"""
+requirements = ["omp-session", "omp"]
+
+# Record: display, session file (tab separated).
+[source]
+command = "omp-session --list"
+shell = "bash"
+display = "{split:\\t:0}"
+output = "{split:\\t:1}"
+
+[preview]
+command = "omp-session --preview '{split:\\t:1}'"
+shell = "bash"
+
+[keybindings]
+enter = "actions:resume"
+ctrl-n = "actions:new"
+
+[actions.resume]
+description = "Resume the session"
+command = "omp-session --resume '{split:\\t:1}'"
+shell = "bash"
+mode = "execute"
+
+[actions.new]
+description = "Start a new omp session"
+command = "omp-session --new"
+shell = "bash"
+mode = "execute"

cable/opencode-sessions.toml

@@ -0,0 +1,38 @@
+[metadata]
+name = "opencode-sessions"
+description = "Browse and resume OpenCode sessions"
+requirements = ["opencode", "jq"]
+
+[source]
+# Use literal strings (''') to avoid escape sequence errors
+command = '''opencode session list --format json | jq -r '.[] | "\(.id)\t\(.title)\t\(.directory)"' '''
+display = "{split:\t:1}  ({split:\t:2})"
+output = "{split:\t:0}"
+
+[preview]
+# We use triple single quotes so we don't have to escape the backslashes for jq or the template engine
+command = '''opencode session list --format json | jq -r '.[] | select(.id == "{split:\t:0}") | "TITLE:     \(.title)\nID:        \(.id)\nPROJECT:   \(.projectId)\nDIRECTORY: \(.directory)\nUPDATED:   \((.updated / 1000) | strftime("%Y-%m-%d %H:%M:%S"))"' '''
+
+[ui]
+layout = "landscape"
+[ui.preview_panel]
+size = 60
+header = "Session: {split:\t:1}"
+border_type = "none"
+scrollbar = false
+padding = { left = 2, right = 1, top = 0, bottom = 0 }
+
+[keybindings]
+shortcut = "f4"
+enter = "actions:resume"
+ctrl-d = "actions:delete"
+
+[actions.resume]
+description = "Resume session"
+command = "opencode -s {split:\t:0}"
+mode = "execute"
+
+[actions.delete]
+description = "Delete session"
+command = '''bash -c 'echo "Delete {split:\t:1}?" && read -p "[y/N]: " conf && [[ $conf == "y" ]] && opencode session delete {split:\t:0} ' '''
+mode = "execute"

cable/pacman-packages.toml

@@ -0,0 +1,21 @@
+[metadata]
+name = "pacman-packages"
+description = "List and manage installed pacman packages"
+requirements = ["pacman"]
+
+[source]
+command = "pacman -Q"
+output = "{split: :0}"
+
+[preview]
+command = "pacman -Qi '{split: :0}' 2>/dev/null"
+
+[actions.remove]
+description = "Remove the selected package"
+command = "sudo pacman -R '{split: :0}'"
+mode = "execute"
+
+[actions.files]
+description = "List files owned by the selected package"
+command = "pacman -Ql '{split: :0}' | less"
+mode = "execute"

cable/path.toml

@@ -0,0 +1,15 @@
+[metadata]
+name = "path"
+description = "Investigate PATH contents"
+requirements = ["fd", "bat"]
+
+[source]
+command = "printf '%s\n' \"$PATH\" | tr ':' '\n'"
+
+[preview]
+command = "fd -tx -d1 . \"{}\" -X printf \"%s\n\" \"{/}\" | sort -f | bat -n --color=always"
+
+[actions.cd]
+description = "Open a shell in the selected PATH directory"
+command = "cd {} && $SHELL"
+mode = "execute"

cable/pdf-files.toml

@@ -0,0 +1,24 @@
+[metadata]
+name = "pdf-files"
+description = "Browse PDF files"
+requirements = ["fd", "pdftotext"]
+
+[source]
+command = [
+  { name = "Default", run = "fd -t f -e pdf ." },
+  { name = "Hidden",  run = "fd -t f -e pdf -H ." },
+]
+
+[preview]
+command = "pdftotext -l 2 -layout '{}' - 2>/dev/null | head -100 || file '{}'"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+enter = "actions:open"
+
+[actions.open]
+description = "Open the selected PDF with default viewer"
+command = "xdg-open {} 2>/dev/null || open {}"
+mode = "fork"

cable/pip-packages.toml

@@ -0,0 +1,27 @@
+[metadata]
+name = "pip-packages"
+description = "List installed Python packages"
+requirements = ["pip"]
+
+[source]
+command = "pip list --format=freeze 2>/dev/null | cut -d= -f1"
+
+[preview]
+command = "pip show '{}'"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+ctrl-u = "actions:upgrade"
+ctrl-d = "actions:uninstall"
+
+[actions.upgrade]
+description = "Upgrade the selected package"
+command = "pip install --upgrade {}"
+mode = "execute"
+
+[actions.uninstall]
+description = "Uninstall the selected package"
+command = "pip uninstall {}"
+mode = "execute"

cable/pj.toml

@@ -0,0 +1,29 @@
+[metadata]
+name = "pj"
+description = """
+Project tasks from every task source between the cwd and the git toplevel
+(package.json, Makefile, justfile, mise, devbox, pyproject), tasks of the most
+recently modified manifest first. Enter runs the task. Discovery, preview and
+run live in ~/.local/bin/pj; `pj` (ctrl-p, and down on an empty prompt in fish,
+zsh and bash) opens this cable with its own scan.
+"""
+requirements = ["pj", "mtime-sort"]
+
+# Record: display, kind, target, root, runner, manifest (tab separated).
+[source]
+command = "pj --list 2>/dev/null"
+shell = "bash"
+display = "{split:\\t:0}"
+
+[preview]
+command = "pj --preview '{split:\\t:1}' '{split:\\t:2}' '{split:\\t:3}' '{split:\\t:5}'"
+shell = "bash"
+
+[keybindings]
+enter = "actions:run"
+
+[actions.run]
+description = "Run the selected task"
+command = "pj --run '{split:\\t:1}' '{split:\\t:2}' '{split:\\t:3}' '{split:\\t:4}'"
+shell = "bash"
+mode = "execute"

cable/ports.toml

@@ -0,0 +1,22 @@
+[metadata]
+name = "ports"
+description = "List listening ports and associated processes"
+requirements = ["ss", "awk"]
+
+[source]
+command = "ss -tlnp 2>/dev/null | tail -n +2 | awk '{gsub(/.*:/,\"\",$4); print $4, $1, $6}' | sed 's/users:((\"//; s/\".*//'"
+display = "{split: :0} ({split: :2})"
+
+[preview]
+command = "ss -tlnp 2>/dev/null | grep ':{split: :0} ' | head -20"
+
+[ui.preview_panel]
+border_type = "none"
+scrollbar = false
+padding = { left = 2, right = 1, top = 0, bottom = 0 }
+size = 40
+
+[actions.kill]
+description = "Kill the process listening on the selected port"
+command = "fuser -k {split: :0}/tcp"
+mode = "execute"

cable/procs.toml

@@ -0,0 +1,38 @@
+[metadata]
+name = "procs"
+description = "A channel to find and manage running processes"
+requirements = ["ps", "awk"]
+
+[source]
+command = "ps -e -o pid=,ucomm= | awk '{print $1, $2}'"
+display = "{split: :1}"
+output = "{split: :0}"
+
+[preview]
+command = "ps -p '{split: :0}' -o user,pid,ppid,state,%cpu,%mem,command | fold"
+
+[keybindings]
+ctrl-k = "actions:kill"
+f2 = "actions:term"
+ctrl-s = "actions:stop"
+ctrl-c = "actions:cont"
+
+[actions.kill]
+description = "Kill the selected process (SIGKILL)"
+command = "kill -9 {split: :0}"
+mode = "execute"
+
+[actions.term]
+description = "Terminate the selected process (SIGTERM)"
+command = "kill -15 {split: :0}"
+mode = "execute"
+
+[actions.stop]
+description = "Stop/pause the selected process (SIGSTOP)"
+command = "kill -STOP {split: :0}"
+mode = "fork"
+
+[actions.cont]
+description = "Continue/resume the selected process (SIGCONT)"
+command = "kill -CONT {split: :0}"
+mode = "fork"

cable/python-venvs.toml

@@ -0,0 +1,20 @@
+[metadata]
+name = "python-venvs"
+description = "Find Python virtual environments"
+requirements = ["find"]
+
+[source]
+command = "find ~ -maxdepth 5 -type f -name 'pyvenv.cfg' 2>/dev/null | xargs -I{} dirname {}"
+
+[preview]
+command = "cat '{}/pyvenv.cfg' 2>/dev/null && echo '' && echo 'Packages:' && '{}/bin/pip' list --format=columns 2>/dev/null | head -20"
+
+[actions.activate]
+description = "Open a shell with the selected venv activated"
+command = "source '{}/bin/activate' && $SHELL"
+mode = "execute"
+
+[actions.packages]
+description = "List all packages in the selected venv"
+command = "'{}/bin/pip' list | less"
+mode = "execute"

cable/recent-files.toml

@@ -0,0 +1,23 @@
+[metadata]
+name = "recent-files"
+description = "List recently modified files (via git or filesystem)"
+requirements = ["git", "bat"]
+
+[source]
+command = [
+  { name = "Recent",    run = "git diff --name-only HEAD~10 HEAD 2>/dev/null || find . -type f -mtime -7 -not -path '*/.*' 2>/dev/null | head -100" },
+  { name = "Last hour", run = "find . -type f -mmin -60 -not -path '*/.*' 2>/dev/null | head -100" },
+]
+
+[preview]
+command = "bat -n --color=always '{}'"
+env = { BAT_THEME = "ansi" }
+
+[keybindings]
+enter = "actions:edit"
+
+[actions.edit]
+description = "Open the selected file in editor"
+command = "${EDITOR:-vim} {}"
+shell = "bash"
+mode = "execute"

cable/rustup.toml

@@ -0,0 +1,20 @@
+[metadata]
+name = "rustup"
+description = "Manage Rust toolchains"
+requirements = ["rustup"]
+
+[source]
+command = "rustup toolchain list"
+
+[preview]
+command = "rustup run '{split: :0}' rustc --version --verbose 2>/dev/null"
+
+[actions.default]
+description = "Set the selected toolchain as default"
+command = "rustup default '{split: :0}'"
+mode = "execute"
+
+[actions.uninstall]
+description = "Uninstall the selected toolchain"
+command = "rustup toolchain uninstall '{split: :0}'"
+mode = "execute"

cable/ssh-hosts.toml

@@ -0,0 +1,18 @@
+[metadata]
+name = "ssh-hosts"
+description = "A channel to select hosts from your SSH config"
+requirements = ["grep", "tr", "cut", "awk"]
+
+[source]
+command = "grep -E '^Host(name)? ' $HOME/.ssh/config | tr -s ' ' | cut -d' ' -f2- | tr ' ' '\n' | grep -v '^$'"
+
+[preview]
+command = "awk '/^Host / { found=0 } /^Host (.*[[:space:]])?'{}'([[:space:]].*)?$/ { found=1 } found' $HOME/.ssh/config"
+
+[keybindings]
+enter = "actions:connect"
+
+[actions.connect]
+description = "SSH into the selected host"
+command = "ssh {}"
+mode = "execute"

cable/systemd-units.toml

@@ -0,0 +1,49 @@
+[metadata]
+name = "systemd-units"
+description = "List and manage systemd services"
+requirements = ["systemctl"]
+
+[source]
+command = [
+  { name = "Active", run = "systemctl list-units --type=service --no-pager --no-legend --plain" },
+  { name = "All",    run = "systemctl list-units --type=service --all --no-pager --no-legend --plain" },
+]
+display = "{split: :0}"
+
+[preview]
+command = "systemctl status '{split: :0}' --no-pager"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+ctrl-s = "actions:start"
+f2 = "actions:stop"
+ctrl-r = "actions:restart"
+ctrl-e = "actions:enable"
+ctrl-d = "actions:disable"
+
+[actions.start]
+description = "Start the selected service"
+command = "sudo systemctl start '{split: :0}'"
+mode = "execute"
+
+[actions.stop]
+description = "Stop the selected service"
+command = "sudo systemctl stop '{split: :0}'"
+mode = "execute"
+
+[actions.restart]
+description = "Restart the selected service"
+command = "sudo systemctl restart '{split: :0}'"
+mode = "execute"
+
+[actions.enable]
+description = "Enable the selected service"
+command = "sudo systemctl enable '{split: :0}'"
+mode = "execute"
+
+[actions.disable]
+description = "Disable the selected service"
+command = "sudo systemctl disable '{split: :0}'"
+mode = "execute"

cable/tailscale-exit-node.toml

@@ -0,0 +1,18 @@
+[metadata]
+name = "tailscale-exit-node"
+description = "A channel to select a tailscale exit node"
+requirements = ["tailscale", "awk"]
+
+[source]
+command = "tailscale exit-node list | awk '/^[[:space:]]*[0-9]+\\./ {gsub(/^[[:space:]]+/, \"\"); print $1}'"
+
+[preview]
+command = "tailscale whois {}"
+
+[keybindings]
+enter = "actions:connect"
+
+[actions.connect]
+description = "Set selected host as exit node"
+command = "tailscale set --exit-node={}"
+mode = "execute"

cable/tea-issues.toml

@@ -0,0 +1,36 @@
+[metadata]
+name = "tea-issues"
+description = "List Gitea issues for the current repo"
+requirements = ["tea", "jq"]
+
+[source]
+command = '''tea issues list --output json --state open </dev/null | jq -r '.[] | "\u001b[32m#\(.index)\u001b[39m" + "\t\(.title) \u001b[33m@\(.author)\u001b[39m" + (if .labels != "" then " \u001b[35m" + .labels + "\u001b[39m" else "" end)'
+'''
+ansi = true
+output = "{strip_ansi|split:#:1|split:\t:0}"
+
+[ui]
+layout = "portrait"
+preview_panel = { header = '{strip_ansi|split:\t:1}', border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[preview]
+command = '''tea issues --output json {strip_ansi|split:#:1|split:\t:0} </dev/null | jq -r '
+.title,
+"#" + (.index | tostring),
+"",
+"\u001b[36mStatus:\u001b[39m    \u001b[32m" + .state + "\u001b[39m",
+"\u001b[36mAuthor:\u001b[39m    \u001b[33m" + .user + "\u001b[39m",
+"\u001b[36mCreated:\u001b[39m   " + .created[:10],
+(if (.labels | length) > 0 then "\u001b[36mLabels:\u001b[39m    " + ([.labels[] | "\u001b[35m" + .name + "\u001b[39m"]
+| join(" ")) else empty end),
+"",
+"\u001b[90m────────────────────────────────────────────────────────────\u001b[39m",
+"",
+(.body // "")
+'
+'''
+
+[actions.close]
+description = "Close the selected issue"
+command = "tea issues close {strip_ansi|split:#:1|split:\t:0}"
+mode = "fork"

cable/tea-prs.toml

@@ -0,0 +1,42 @@
+[metadata]
+name = "tea-prs"
+description = "List Gitea PRs for the current repo"
+requirements = ["tea", "jq"]
+
+[source]
+command = '''tea pulls list --output json --state open </dev/null | jq -r '.[] | "\u001b[32m#\(.index)\u001b[39m" + "\t\(.title) \u001b[33m@\(.author)\u001b[39m" + (if .labels != "" then " \u001b[35m" + .labels + "\u001b[39m" else "" end)'
+'''
+ansi = true
+output = "{strip_ansi|split:#:1|split:\t:0}"
+
+[ui]
+layout = "portrait"
+preview_panel = { header = '{strip_ansi|split:\t:1}', border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[preview]
+command = '''tea pulls --output json {strip_ansi|split:#:1|split:\t:0} </dev/null | jq -r '
+.title,
+"#" + (.index | tostring),
+"",
+"\u001b[36mStatus:\u001b[39m     \u001b[32m" + .state + "\u001b[39m  " + .base + " ← " + .head,
+"\u001b[36mAuthor:\u001b[39m     \u001b[33m" + .user + "\u001b[39m",
+"\u001b[36mCreated:\u001b[39m    " + .created[:10],
+"\u001b[36mUpdated:\u001b[39m    " + .updated[:10],
+(if (.labels | length) > 0 then "\u001b[36mLabels:\u001b[39m     " + ([.labels[] | "\u001b[35m" + .name + "\u001b[39m"] | join(" ")) else empty end),
+"\u001b[36mMergeable:\u001b[39m  " + (if .mergeable then "\u001b[32m✓ Clean\u001b[39m" else "\u001b[31m✗ Dirty\u001b[39m" end),
+"",
+"\u001b[90m────────────────────────────────────────────────────────────\u001b[39m",
+"",
+(.body // "")
+'
+'''
+
+[actions.checkout]
+description = "Checkout the PR branch locally"
+command = "tea pulls checkout {strip_ansi|split:#:1|split:\t:0}"
+mode = "execute"
+
+[actions.merge]
+description = "Merge the selected PR"
+command = "tea pulls merge {strip_ansi|split:#:1|split:\t:0}"
+mode = "execute"

cable/text.toml

@@ -0,0 +1,29 @@
+[metadata]
+name = "text"
+description = "A channel to find and select text from files"
+requirements = ["rg", "bat"]
+
+[source]
+command = [
+  { name = "Default", run = "rg . --no-heading --line-number --colors 'match:fg:white' --colors 'path:fg:blue' --color=always" },
+  { name = "Hidden",  run = "rg . --no-heading --line-number --hidden --colors 'match:fg:white' --colors 'path:fg:blue' --color=always" },
+]
+ansi = true
+output = "{strip_ansi|split:\\::..2}"
+
+[preview]
+command = "bat -n --color=always '{strip_ansi|split:\\::0}'"
+env = { BAT_THEME = "ansi" }
+offset = '{strip_ansi|split:\::1}'
+
+[ui]
+preview_panel = { header = '{strip_ansi|split:\::..2}', border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[keybindings]
+enter = "actions:edit"
+
+[actions.edit]
+description = "Open file in editor at line"
+command = "${EDITOR:-vim} '+{strip_ansi|split:\\::1}' '{strip_ansi|split:\\::0}'"
+shell = "bash"
+mode = "execute"

cable/tldr.toml

@@ -0,0 +1,21 @@
+[metadata]
+name = "tldr"
+description = "Browse and preview TLDR help pages for command-line tools"
+requirements = ["tldr"]
+
+[source]
+command = "tldr --list"
+
+[preview]
+command = "tldr '{0}' --color always"
+
+[ui]
+layout = "portrait"
+
+[keybindings]
+ctrl-e = "actions:open"
+
+[actions.open]
+description = "Open the selected TLDR page"
+command = "tldr '{0}'"
+mode = "execute"

cable/tmux-sessions.toml

@@ -0,0 +1,22 @@
+[metadata]
+name = "tmux-sessions"
+description = "List and manage tmux sessions"
+requirements = ["tmux"]
+
+[source]
+command = "tmux list-sessions -F '#{session_name}\t#{session_windows} windows\t#{session_created_string}'"
+display = "{split:\t:0} ({split:\t:1})"
+output = "{split:\t:0}"
+
+[preview]
+command = "tmux capture-pane -t '{split:\t:0}' -p 2>/dev/null || echo 'No preview available'"
+
+[actions.attach]
+description = "Attach to the selected session"
+command = "tmux attach-session -t '{split:\t:0}'"
+mode = "execute"
+
+[actions.kill]
+description = "Kill the selected session"
+command = "tmux kill-session -t '{split:\t:0}'"
+mode = "fork"

cable/tmux-windows.toml

@@ -0,0 +1,22 @@
+[metadata]
+name = "tmux-windows"
+description = "List and switch between tmux windows"
+requirements = ["tmux"]
+
+[source]
+command = "tmux list-windows -a -F '#{session_name}:#{window_index}\t#{window_name}\t#{pane_current_command}'"
+display = "{split:\t:0} - {split:\t:1} ({split:\t:2})"
+output = "{split:\t:0}"
+
+[preview]
+command = "tmux capture-pane -t '{split:\t:0}' -p 2>/dev/null || echo 'No preview available'"
+
+[actions.select]
+description = "Switch to the selected window"
+command = "tmux select-window -t '{split:\t:0}'"
+mode = "execute"
+
+[actions.kill]
+description = "Kill the selected window"
+command = "tmux kill-window -t '{split:\t:0}'"
+mode = "fork"

cable/todo-comments.toml

@@ -0,0 +1,26 @@
+[metadata]
+name = "todo-comments"
+description = "Find TODO, FIXME, HACK, and XXX comments in codebase"
+requirements = ["rg", "bat"]
+
+[source]
+command = "rg -n --color=always '(TODO|FIXME|HACK|XXX|BUG|WARN):?'"
+ansi = true
+output = "{strip_ansi|split:\\::..2}"
+
+[preview]
+command = "bat -n --color=always --highlight-line '{strip_ansi|split:\\::1}' '{strip_ansi|split:\\::0}'"
+env = { BAT_THEME = "ansi" }
+offset = "{strip_ansi|split:\\::1}"
+
+[ui]
+preview_panel = { header = "{strip_ansi|split:\\::..2}", border_type = "none", scrollbar = false, padding = { left = 2, right = 1, top = 0, bottom = 0 } }
+
+[keybindings]
+enter = "actions:edit"
+
+[actions.edit]
+description = "Open file in editor at the comment"
+command = "${EDITOR:-vim} '+{strip_ansi|split:\\::1}' '{strip_ansi|split:\\::0}'"
+shell = "bash"
+mode = "execute"

cable/unicode.toml

@@ -0,0 +1,43 @@
+[metadata]
+name = "unicode"
+description = '''Search and insert unicode characters
+
+The UnicodeData.txt file is included by many packages.
+
+In addition to:
+
+Alpine Linux: unicode-character-database
+Arch: unicode-character-database
+Debian/Ubuntu: unicode-data
+Fedora / RHEL / CentOS unicode-ucd
+Gentoo: app-i18n/unicode-data
+NixOS: unicode/unicode-data
+openSUSE: unicode-ucd
+
+UnicodData.txt may also aleady be provided by:
+
+1) Many java packages
+2) Latex packages
+3) Still others
+
+It may in some cases be necessary to alter UNICODE_FILE below.
+
+'''
+requirements = ["awk", "perl"]
+
+[source]
+command = '''
+UNICODE_FILE="/usr/share/unicode/ucd/UnicodeData.txt"
+awk -F';' '
+  $2 !~ /^</ { print $1 "|" $2 }
+' "$UNICODE_FILE" \
+| perl -CS -F'\|' -lane '
+    $code = $F[0];
+    $desc = $F[1];
+    $char = chr(hex($code));
+    print "U+$code|$char|$desc" if $char =~ /\p{Print}/;
+'
+'''
+
+display = "{split:|:0}    {split:|:1}    {split:|:2}"
+output = "{split:|:1}"

cable/wifi.toml

@@ -0,0 +1,17 @@
+[metadata]
+name = "wifi"
+description = "Scan and connect to WiFi networks"
+requirements = ["nmcli"]
+
+[source]
+command = "nmcli -t -f SSID,SIGNAL,SECURITY device wifi list 2>/dev/null | grep -v '^:' | sort -t: -k2 -rn"
+display = "{split:\\::0} ({split:\\::1}% {split:\\::2})"
+output = "{split:\\::0}"
+
+[preview]
+command = "nmcli -t -f SSID,BSSID,MODE,FREQ,SIGNAL,SECURITY,ACTIVE device wifi list 2>/dev/null | grep '^{split:\\::0}:'"
+
+[actions.connect]
+description = "Connect to the selected network"
+command = "nmcli device wifi connect '{split:\\::0}'"
+mode = "execute"

cable/zoxide.toml

@@ -0,0 +1,26 @@
+[metadata]
+name = "zoxide"
+description = "Browse zoxide directory history"
+requirements = ["zoxide"]
+
+[source]
+command = "zoxide query -l"
+no_sort = true
+frecency = false
+
+[preview]
+command = "ls -la --color=always '{}'"
+
+[keybindings]
+enter = "actions:cd"
+ctrl-d = "actions:remove"
+
+[actions.cd]
+description = "Change to the selected directory"
+command = "cd {} && $SHELL"
+mode = "execute"
+
+[actions.remove]
+description = "Remove the selected directory from zoxide"
+command = "zoxide remove {}"
+mode = "fork"

cable/zsh-history.toml

@@ -0,0 +1,16 @@
+[metadata]
+name = "zsh-history"
+description = "A channel to select from your zsh history"
+requirements = ["zsh"]
+
+[source]
+command = "sed '1!G;h;$!d' ${HISTFILE:-${HOME}/.zsh_history}"
+display = "{split:;:1..}"
+output = "{split:;:1..}"
+no_sort = true
+frecency = false
+
+[actions.execute]
+description = "Execute the selected command"
+command = "zsh -c '{split:;:1..}'"
+mode = "execute"