-- ============================================================================
-- Personal overrides, ported from the niri config.
-- Append to ~/.config/hypr/hyprland.lua, after require("default.hypr.omarchy").
-- Every rebind of an Omarchy default is unbound first. The comment after each
-- unbind says what the key did before.
-- ============================================================================

-- ─── Window management ──────────────────────────────────────────────────────

-- Mod+Q -> close. Omarchy already binds this, so it is only made explicit.
hl.unbind("SUPER + Q")
o.bind("SUPER + Q", "Close window", hl.dsp.window.close())

-- Mod+W was tabbed display. Here it flips the workspace layout, and sets every
-- column to 75% of the screen when the workspace turns to scrolling. Dwindle
-- needs no widths, because it re-tiles on its own.
-- Needs ~/.local/bin/omarchy-toggle-layout. Pass another fraction to change
-- the width, e.g. "omarchy-toggle-layout 0.6".
hl.unbind("SUPER + W") -- was: close window
o.bind("SUPER + W", "Toggle workspace layout", "omarchy-toggle-layout")

-- Mod+BackSpace -> last window.
hl.unbind("SUPER + BACKSPACE") -- was: toggle window transparency
o.bind("SUPER + BACKSPACE", "Focus last window", hl.dsp.focus({ last = true }))

-- Tabs. Hyprland groups are the nearest thing to a niri tabbed column.
-- SUPER + G (group) and SUPER + ALT + TAB (next in group) are Omarchy defaults.

-- ─── Focus and swap: hjkl ───────────────────────────────────────────────────

-- Focus steps through the windows of a group first, and leaves the group only
-- at the ends. This is the focus half of the smart-move behavior below, and
-- Hyprland does it on its own, so no script is needed.
hl.config({ binds = { movefocus_cycles_groupfirst = true } })

hl.unbind("SUPER + J") -- was: toggle window split
hl.unbind("SUPER + K") -- was: keybindings menu
hl.unbind("SUPER + L") -- was: toggle workspace layout

o.bind("SUPER + H", "Focus on left window", hl.dsp.focus({ direction = "l" }))
o.bind("SUPER + J", "Focus on below window", hl.dsp.focus({ direction = "d" }))
o.bind("SUPER + K", "Focus on above window", hl.dsp.focus({ direction = "u" }))
o.bind("SUPER + L", "Focus on right window", hl.dsp.focus({ direction = "r" }))

-- The old SUPER + J job, moved to a free key. Dwindle only; toggling needs
-- dwindle.preserve_split, which Omarchy already sets.
o.bind("SUPER + D", "Toggle window split", hl.dsp.layout("togglesplit"))

-- Smart move: merge into the neighboring group if there is one, else swap.
-- Needs ~/.local/bin/omarchy-smart-move.
o.bind("SUPER + SHIFT + H", "Move or merge left", "omarchy-smart-move l")
o.bind("SUPER + SHIFT + J", "Move or merge down", "omarchy-smart-move d")
o.bind("SUPER + SHIFT + K", "Move or merge up", "omarchy-smart-move u")
o.bind("SUPER + SHIFT + L", "Move or merge right", "omarchy-smart-move r")

-- ─── Workspaces and monitors ────────────────────────────────────────────────

hl.unbind("SUPER + CTRL + K") -- was: Herdr keybindings
o.bind("SUPER + CTRL + J", "Next workspace", hl.dsp.focus({ workspace = "e+1" }))
o.bind("SUPER + CTRL + K", "Previous workspace", hl.dsp.focus({ workspace = "e-1" }))

-- Workspaces 1 to 5 on the home row of the left half: ALT to focus,
-- ALT + SHIFT to send the window there. No Omarchy default uses ALT with a
-- letter, so nothing is unbound.
for index, key in ipairs({ "Q", "W", "E", "R", "T" }) do
  local workspace = tostring(index)

  o.bind("ALT + " .. key, "Switch to workspace " .. workspace, hl.dsp.focus({ workspace = workspace }))
  o.bind("ALT + SHIFT + " .. key, "Move window to workspace " .. workspace, hl.dsp.window.move({ workspace = workspace }))
end

hl.unbind("SUPER + O") -- was: pop window out
hl.unbind("SUPER + SHIFT + O") -- was: Obsidian (moved to SUPER + CTRL + ALT + O)
o.bind("SUPER + O", "Focus next monitor", hl.dsp.focus({ monitor = "+1" }))
o.bind("SUPER + SHIFT + O", "Move window to next monitor", hl.dsp.window.move({ monitor = "+1" }))

o.bind("SUPER + CTRL + SHIFT + J", "Move window to next monitor", hl.dsp.window.move({ monitor = "+1" }))
o.bind("SUPER + CTRL + SHIFT + K", "Move window to previous monitor", hl.dsp.window.move({ monitor = "-1" }))

-- Named workspaces, in place of niri-dynamic-workspaces.
o.bind("SUPER + SHIFT + CTRL + ALT + W", "Workspace w", hl.dsp.focus({ workspace = "name:w" }))
o.bind("SUPER + SHIFT + CTRL + ALT + H", "Workspace h", hl.dsp.focus({ workspace = "name:h" }))
o.bind("SUPER + CTRL + ALT + X", "Workspace x", hl.dsp.focus({ workspace = "name:x" }))

-- ─── Sizing ─────────────────────────────────────────────────────────────────

-- Mod+R / Mod+Shift+R. Needs ~/.local/bin/omarchy-cycle-window-size.
o.bind("SUPER + R", "Cycle window size", "omarchy-cycle-window-size")
o.bind("SUPER + SHIFT + R", "Cycle window size back", "omarchy-cycle-window-size prev")

-- Alt+Shift+hjkl. Hyprland resizes by pixels, not by percent, so 100 px
-- replaces the niri 10%.
o.bind("ALT + H", "Shrink window width", hl.dsp.window.resize({ x = -100, y = 0, relative = true }))
o.bind("ALT + L", "Grow window width", hl.dsp.window.resize({ x = 100, y = 0, relative = true }))
o.bind("ALT + K", "Shrink window height", hl.dsp.window.resize({ x = 0, y = -100, relative = true }))
o.bind("ALT + J", "Grow window height", hl.dsp.window.resize({ x = 0, y = 100, relative = true }))

-- Column fitting. These are scrolling layout messages, so they do nothing on
-- a dwindle workspace. Mod+F (expand to available width) has no exact match;
-- the Omarchy default SUPER + ALT + F (full width) is the closest.
o.bind("SUPER + ALT + C", "Fit active column", hl.dsp.layout("fit active"))
o.bind("SUPER + SHIFT + ALT + C", "Fit visible columns", hl.dsp.layout("fit visible"))

-- ─── Applications ───────────────────────────────────────────────────────────
-- Same modifier block as the niri config. Each one focuses an open window
-- before it launches a new one. The launch command uses the same desktop
-- entry the vicinae URLs named, so no binary names are guessed.

hl.unbind("SUPER + CTRL + A") -- was: audio panel
o.bind("SUPER + CTRL + A", "Claude", "omarchy-launch-or-focus claude \"gtk-launch com.anthropic.Claude\"")
o.bind("SUPER + CTRL + G", "Gemini", "omarchy-launch-or-focus gemini \"gtk-launch gemini-desktop\"")

o.bind("SUPER + CTRL + ALT + H", "AI apps", "omarchy-cycle ai")
o.bind("SUPER + CTRL + ALT + J", "Terminals", "omarchy-cycle-terminal")
o.bind("SUPER + CTRL + ALT + K", "Browsers", "omarchy-cycle-browser")
o.bind("SUPER + CTRL + ALT + G", "Ghostty", "omarchy-cycle ghostty")
o.bind("SUPER + CTRL + ALT + Y", "Web apps", "omarchy-cycle webapp")
o.bind("SUPER + CTRL + ALT + O", "Obsidian", "omarchy-cycle obsidian")
o.bind("SUPER + CTRL + ALT + F", "File manager", "omarchy-launch-or-focus nautilus \"gtk-launch org.gnome.Nautilus\"")
o.bind("SUPER + CTRL + ALT + E", "Fastmail", "omarchy-launch-or-focus fastmail \"gtk-launch fastmail\"")
o.bind("SUPER + CTRL + ALT + M", "Beeper", "omarchy-launch-or-focus beeper \"gtk-launch beeper\"")

hl.unbind("SUPER + CTRL + ALT + T") -- was: show time
o.bind("SUPER + CTRL + ALT + T", "Todoist", "omarchy-launch-or-focus todoist \"gtk-launch todoist\"")

hl.unbind("SUPER + CTRL + ALT + W") -- was: toggle weather
o.bind("SUPER + CTRL + ALT + W", "tldraw", "omarchy-launch-or-focus tldraw \"gtk-launch tldraw_offline\"")

o.bind("SUPER + CTRL + ALT + SPACE", "Sticky notes", "omarchy-launch-or-focus sticky \"gtk-launch io.github.faridjaff.StickyNotesCanvas\"")

hl.unbind("SUPER + SHIFT + G") -- was: Signal
o.bind("SUPER + SHIFT + G", "Goliath", { launch = "kitty --title=goliath ssh -t goliath tmux new-session -A -s main" })

-- ─── Screenshots ────────────────────────────────────────────────────────────

hl.unbind("SUPER + S") -- was: toggle scratchpad
hl.unbind("SUPER + SHIFT + S") -- was: Google Maps
hl.unbind("SUPER + CTRL + S") -- was: share menu
o.bind("SUPER + S", "Screenshot region", "omarchy-capture-screenshot region")
o.bind("SUPER + SHIFT + S", "Screenshot window", "omarchy-capture-screenshot windows")
o.bind("SUPER + CTRL + S", "Screenshot monitor", "omarchy-capture-screenshot fullscreen")

-- ─── Session ────────────────────────────────────────────────────────────────

hl.unbind("SUPER + SHIFT + E") -- was: Email (Fastmail is on SUPER + CTRL + ALT + E)
o.bind("SUPER + SHIFT + E", "System menu", "omarchy-menu toggle system")
o.bind("SUPER + SHIFT + Q", "System menu", "omarchy-menu toggle system")

-- ─── Dictation ──────────────────────────────────────────────────────────────

o.bind("SUPER + F24", "Dictate to Hermes", "voxtype record toggle --profile hermes")

-- ─── Menus, in place of vicinae ─────────────────────────────────────────────
-- Same keys as the niri config, pointed at the Omarchy menus.

-- Mod+Space (vicinae toggle) needs no line: SUPER + SPACE is already the
-- Omarchy menu. SUPER + ALT + SPACE is the apps menu.

hl.unbind("SUPER + SHIFT + SPACE") -- was: toggle top bar
o.bind("SUPER + SHIFT + SPACE", "Emojis", "omarchy-shell shell toggle omarchy.emojis")

hl.unbind("SUPER + P") -- was: pseudo window
o.bind("SUPER + P", "Clipboard manager", "omarchy-shell shell toggle omarchy.clipboard")

-- Mod+Shift+Return was the vicinae window switcher. ScrollOverview on
-- ALT + TAB below takes that job, so SUPER + SHIFT + RETURN keeps its default
-- job of opening the browser.

-- ─── ScrollOverview plugin ──────────────────────────────────────────────────

if hl.plugin.scrolloverview then
  hl.config({
    plugin = {
      scrolloverview = {
        gesture_distance = 300, -- how far is the "max" for the gesture
        scale = 0.5, -- preferred overview scale
        workspace_gap = 100,
        layout = "vertical", -- vertical or horizontal
        wallpaper = 2, -- 0: global only, 1: per-workspace only, 2: both
        blur = true, -- blur only the main overview wallpaper
        shadow = {
          enabled = true,
          range = 50,
        },
      },
    },
  })

  -- Omarchy puts two binds on ALT + TAB: focus next window, and reveal the
  -- active window on top. Both go, and the overview takes the key. Written with
  -- o.bind and a description, so it shows up in the keybindings menu.
  hl.unbind("ALT + TAB")
  o.bind("ALT + TAB", "Toggle overview", function()
    hl.plugin.scrolloverview.overview("toggle all")
  end)
end