-- Keep only your personal input overrides here. Uncommented settings below
-- replace Omarchy's defaults.

-- Key repeat. Repeat is synthesized by the compositor (wl_keyboard.repeat_info
-- -> the client repeats locally), so this costs nothing on the wireless link.
-- Omarchy's 250ms / 40Hz already beats Hyprland's 600 / 25; tighten it further
-- so held keys (backspace, arrows, vim motions) start and stream sooner.
--
-- Everything else in the keystroke path was checked and is already optimal for
-- the Pilot W-Corne (55d4:0461, Vial/QMK over a 2.4GHz dongle): the dongle
-- advertises bInterval=1 (1000Hz polling), udev pins power/control=on (no USB
-- autosuspend), nothing polls its raw-HID interface, WiFi sits on 5GHz, and
-- render:new_render_scheduling is off (no triple-buffer frame of latency).
-- Remaining latency is the 60Hz Studio Display refresh and the fcitx5
-- input-method hop (see omarchy-fcitx5.service), neither of which is an
-- input option.
hl.config({
  input = {
    repeat_delay = 200,
    repeat_rate = 50,
  },
})

-- Keyboard layout and options.
-- See https://wiki.hypr.land/Configuring/Basics/Variables/#input
-- hl.config({
--   input = {
--     -- Use multiple keyboard layouts and switch between them with Left Alt + Right Alt.
--     kb_layout = "us,dk,eu",
--     kb_options = "compose:caps,shift:both_capslock_cancel,grp:alts_toggle",
--
--     -- Use a specific keyboard variant if needed (e.g. intl for international keyboards).
--     kb_variant = "intl",
--
--     -- Change speed of keyboard repeat.
--     repeat_rate = 40,
--     repeat_delay = 250,
--
--     -- Start with numlock on by default.
--     numlock_by_default = true,
--
--     -- Increase sensitivity for mouse/trackpad (default: 0).
--     sensitivity = 0.35,
--
--     -- Turn off mouse acceleration (default: adaptive).
--     accel_profile = "flat",
--
--     touchpad = {
--       -- Use natural (inverse) scrolling.
--       natural_scroll = true,
--
--       -- Use two-finger clicks for right-click instead of lower-right corner.
--       clickfinger_behavior = true,
--
--       -- Control the speed of your scrolling.
--       scroll_factor = 0.4,
--
--       -- Enable the touchpad while typing.
--       disable_while_typing = false,
--
--       -- Left-click-and-drag with three fingers.
--       drag_3fg = 1,
--     },
--   },
-- })

-- App-specific touchpad scroll speeds.
-- o.window("(Alacritty|kitty|foot)", { scroll_touchpad = 1.5 })
-- o.window("com.mitchellh.ghostty", { scroll_touchpad = 0.2 })

-- Enable touchpad gestures for changing workspaces.
-- See https://wiki.hypr.land/Configuring/Advanced-and-Cool/Gestures/
-- hl.gesture({ fingers = 3, direction = "horizontal", action = "workspace" })

-- Enable touchpad gestures for moving focus (helpful on scrolling layout).
-- hl.gesture({ fingers = 3, direction = "left", action = function() hl.dispatch(hl.dsp.focus({ direction = "l" })) end })
-- hl.gesture({ fingers = 3, direction = "right", action = function() hl.dispatch(hl.dsp.focus({ direction = "r" })) end })

-- Tablets / pens.
-- Hyprland maps a tablet across the *whole* monitor layout by default
-- (input.tablet.output is empty), so a pen stretches over eDP-1 + the external
-- display at once. Pin each tablet to a single output instead.
-- Device names come from `hyprctl devices` (the "Tablet" entry, not "Tablet Pad").

-- Built-in digitizer of the Flow Z13: it physically *is* the laptop panel.
hl.device({ name = "elan9008:00-04f3:43c7-stylus", output = "eDP-1" })

-- Wacom Intuos BT S: pinned to the Studio Display, matched on EDID description
-- so it survives a different DP connector after re-docking. With that display
-- absent, Hyprland maps across the whole layout, which undocked is just eDP-1.
--
-- The tablet is 152x95mm (16:10) and the display is 16:9, so the active area is
-- cropped to a 152x85.5mm (16:9) band to keep strokes undistorted while still
-- reaching every pixel. The band starts at the top edge, leaving the bottom
-- 9.5mm of the tablet as dead space (the pen there parks at the screen bottom).
hl.device({
  name = "wacom-intuos-bt-s-pen",
  output = "desc:Apple Computer Inc StudioDisplay 0x984262A7",
  active_area_size = { 152, 85.5 },
  active_area_position = { 0, 0 },
})

-- Left-handed use rotates the tablet 180 degrees: left_handed = true

-- The 4 ExpressKeys ("Tablet Pad") cannot be bound from Hyprland; only apps
-- that implement the tablet-v2 pad protocol (e.g. Krita) see them.