feat(config): switch tv pickers to --inline and improve prompt redraw handling

dot_config/bash/functions/gho.bash

@@ -1,8 +1,8 @@
 # Pick a ghq repo / Obsidian vault with tv (ghq-repos cable) + cd.
 gho() {
     local dir
-    dir=$(tv ghq-repos) || return
-    [ -n "$dir" ] || return
+    dir=$(tv ghq-repos --inline) || return
+    [ -n "$dir" ] || return 1
     cd "$dir" || return
     clear
     if [ -d .git ]; then

dot_config/bash/keybinds.bash

@@ -4,33 +4,67 @@
 #   ctrl-p → pj (pj cable)                 down   → pj on an empty prompt
 #   ctrl-t → tv smart autocomplete (tv init bash ships no ctrl-t)
 # Keys owned by kitty.conf never reach the shell: ctrl-h/j/k/l (pass_keys.py).
+#
+# Every picker runs tv --inline: it opens on the line below the prompt and
+# leaves the cursor on that line when it exits. When nothing was printed
+# below, the binding steps back up (_kb_up) so readline redraws the prompt in
+# place after bind -x; output that must stay (a pj task) is left alone.
 
-# bind -x runs in the shell process, so gho's cd persists — but readline keeps
-# drawing the prompt it started with. Each key is therefore a macro: \C-xN
-# stashes the typed line and runs the command, \C-m accepts the now-empty
-# line (bash prints a fresh prompt for the new cwd; nothing reaches history),
-# and \C-x0 restores the stash into the new line.
-_kb_run() {
+_kb_up() { printf '\033[A' >/dev/tty; }
+
+# ctrl-e: enter opens nvim, which restores the cursor to tv's line.
+_kb_git_files() {
+    tv git-files --inline </dev/tty
+    _kb_up
+}
+bind -x '"\C-e": _kb_git_files'
+
+# ctrl-p, and down on an empty prompt. pj reports through $PJ_STATE: `open`
+# = cancelled, `ran` = a task printed output, empty = no task sources.
+_kb_pj() {
+    local state
+    state=$(mktemp) || return
+    PJ_STATE=$state pj "$@" </dev/tty
+    [ "$(<"$state")" = open ] && _kb_up
+    rm -f "$state"
+}
+bind -x '"\C-p": _kb_pj'
+
+# ctrl-o: gho, split so the prompt is right. bind -x runs in the shell
+# process, so the cd persists — but readline keeps drawing the prompt it
+# started with. The macro runs \C-x1 (pick with tv, cd), then \C-x2 and \C-x3,
+# which _kb_gho rebinds: after a cd, \C-x2 accepts the stashed-empty line
+# (bash prints a fresh prompt for the new cwd; nothing reaches history) and
+# \C-x3 does gho's clear + onefetch, after which readline redraws that fresh
+# prompt below the output; when cancelled both just redraw. \C-x0 restores
+# the typed text.
+_kb_gho() {
+    local dir
     _kb_line=$READLINE_LINE _kb_point=$READLINE_POINT
+    dir=$(tv ghq-repos --inline </dev/tty)
+    _kb_up
+    if [ -n "$dir" ] && cd "$dir"; then
         READLINE_LINE='' READLINE_POINT=0
-    "$@" </dev/tty
+        bind '"\C-x2": accept-line'
+        bind -x '"\C-x3": _kb_gho_show'
+    else
+        bind '"\C-x2": redraw-current-line'
+        bind '"\C-x3": redraw-current-line'
+    fi
+}
+_kb_gho_show() {
+    clear
+    if [ -d .git ]; then
+        onefetch
+    fi
 }
 _kb_restore() {
     READLINE_LINE=${_kb_line-} READLINE_POINT=${_kb_point-0}
     unset _kb_line _kb_point
 }
+bind -x '"\C-x1": _kb_gho'
 bind -x '"\C-x0": _kb_restore'
-
-# _kb_bind KEY SLOT COMMAND…
-_kb_bind() {
-    local key=$1 slot=$2
-    shift 2
-    bind -x "\"\\C-x$slot\": _kb_run $*"
-    bind "\"$key\": \"\\C-x$slot\\C-m\\C-x0\""
-}
-_kb_bind '\C-o' 1 gho
-_kb_bind '\C-e' 2 tv git-files
-_kb_bind '\C-p' 3 pj
+bind '"\C-o": "\C-x1\C-x2\C-x3\C-x0"'
 
 # down: the pj cable on an idle, empty prompt, otherwise history search
 # (fish's _pj_bind_down). bind -x can't call readline functions, so _kb_down
@@ -40,7 +74,7 @@ _kb_down() {
         bind '"\C-x5": history-search-forward'
         return
     fi
-    PJ_QUIET=1 pj </dev/tty
+    PJ_QUIET=1 _kb_pj
     bind '"\C-x5": redraw-current-line'
 }
 bind -x '"\C-x4": _kb_down'
@@ -51,7 +85,8 @@ bind '"\eOB": "\C-x4\C-x5"'
 # (shell_integration.channel_triggers) and insert the picks there, quoted.
 _kb_tv_autocomplete() {
     local pre=${READLINE_LINE:0:READLINE_POINT} out item ins=''
-    out=$(tv --autocomplete-prompt "$pre" </dev/tty) || return
+    out=$(tv --autocomplete-prompt "$pre" --inline </dev/tty)
+    _kb_up
     while IFS= read -r item; do
         [ -n "$item" ] && ins+="$(printf '%q' "$item") "
     done <<<"$out"

dot_config/fish/functions/_gho_bind.fish

@@ -0,0 +1,13 @@
+function _gho_bind --description 'ctrl-o: gho (tv --inline), then redraw the prompt in the right place'
+    set -l before $PWD
+    gho
+    if test "$PWD" = "$before"
+        # Cancelled (or the nvim action ran): tv --inline left the cursor on
+        # the line below the prompt; step back so repaint redraws in place.
+        printf '\033[A' >/dev/tty
+    else
+        # cd + clear + onefetch: put the prompt below onefetch's output.
+        printf '\n' >/dev/tty
+    end
+    commandline -f repaint
+end

dot_config/fish/functions/_pj_bind.fish

@@ -0,0 +1,21 @@
+function _pj_bind --description 'ctrl-p / down: pj (tv --inline), then redraw the prompt in the right place'
+    # pj reports through $PJ_STATE: `open` = the picker was cancelled and
+    # left the cursor on the line below the prompt; empty = no task sources,
+    # nothing drawn — but fish's repaint after an external command still
+    # lands one line low, so both step back up. `ran` = a task printed
+    # output: new line, prompt below it.
+    set -lx PJ_STATE (mktemp)
+    if contains -- --quiet $argv
+        set -lx PJ_QUIET 1
+    end
+    pj
+    set -l state (cat $PJ_STATE)
+    switch "$state"
+        case open ''
+            printf '\033[A' >/dev/tty
+        case ran
+            printf '\n' >/dev/tty
+    end
+    rm -f $PJ_STATE
+    commandline -f repaint
+end

dot_config/fish/functions/_pj_bind_down.fish

@@ -13,9 +13,9 @@ function _pj_bind_down --description "down arrow: pj tv cable on an idle empty p
         return
     end
 
-    # pj is ~/.local/bin/pj (also ctrl-p), which opens the `pj` tv cable.
-    # PJ_QUIET keeps it silent when the tree has no task source at all, so
-    # down is a no-op outside projects instead of printing an error per press.
-    PJ_QUIET=1 pj
-    commandline -f repaint
+    # _pj_bind runs ~/.local/bin/pj (also ctrl-p), which opens the `pj` tv
+    # cable. --quiet (PJ_QUIET) keeps it silent when the tree has no task
+    # source at all, so down is a no-op outside projects instead of printing
+    # an error per press.
+    _pj_bind --quiet
 end

dot_config/fish/functions/_tv_inline.fish

@@ -0,0 +1,10 @@
+function _tv_inline --description 'tv --inline below the prompt, cursor back on the prompt line; stdout is the pick'
+    # tv --inline opens on the line below the prompt and leaves the cursor on
+    # its own first row when it exits; step back up so the following
+    # `commandline -f repaint` redraws the prompt in place instead of one line
+    # lower. /dev/tty keeps the move out of callers that capture stdout (gho).
+    tv $argv --inline
+    set -l st $status
+    printf '\033[A' >/dev/tty
+    return $st
+end

dot_config/fish/functions/fish_user_key_bindings.fish

@@ -11,13 +11,15 @@ function fish_user_key_bindings
         #   ctrl-g → lazygit overlay, ctrl-a → omp hsplit, ctrl-y → yazi vsplit,
         #   ctrl-h/j/k/l → vim-aware split nav (pass_keys.py).
         # ctrl-e: tv git-files (bat preview, enter opens nvim). ctrl-o, ctrl-p
-        # and down also open tv cables — same keys in zsh and bash.
-        bind -M $mode ctrl-e 'tv git-files; commandline -f repaint'
+        # and down also open tv cables — same keys in zsh and bash. tv runs
+        # --inline below the prompt; _tv_inline/_gho_bind/_pj_bind put the
+        # prompt back in place (or below any output) afterwards.
+        bind -M $mode ctrl-e '_tv_inline git-files; commandline -f repaint'
         bind -M $mode ctrl-b purple repaint
         bind -M $mode ctrl-y clip-last
 
-        bind -M $mode ctrl-o 'gho; commandline -f repaint'
-        bind -M $mode ctrl-p 'pj; commandline -f repaint'
+        bind -M $mode ctrl-o _gho_bind
+        bind -M $mode ctrl-p _pj_bind
         bind -M $mode ctrl-a 'omp; commandline -f repaint'
         bind -M $mode ctrl-w 'atuin ai inline; commandline -f repaint'
 

dot_config/fish/functions/gho.fish

@@ -1,6 +1,6 @@
 function gho --description 'pick a ghq repo / Obsidian vault (tv ghq-repos cable) + cd'
-    set -l dir (tv ghq-repos); or return
-    test -n "$dir"; or return
+    set -l dir (tv ghq-repos --inline); or return
+    test -n "$dir"; or return 1
     cd $dir; or return
     clear
     if test -d .git

dot_config/zsh/functions/gho.zsh

@@ -1,8 +1,8 @@
 # Pick a ghq repo / Obsidian vault with tv (ghq-repos cable) + cd.
 gho() {
     local dir
-    dir=$(tv ghq-repos) || return
-    [ -n "$dir" ] || return
+    dir=$(tv ghq-repos --inline) || return
+    [ -n "$dir" ] || return 1
     cd "$dir" || return
     clear
     if [ -d .git ]; then

dot_config/zsh/keybinds.zsh

@@ -8,49 +8,84 @@ unsetopt flow_control # free ^Q/^S in zle so the ctrl-q exit bind fires
 # Generic runner: widget `run-<cmd>` executes <cmd> (function or binary) with
 # the tty as stdin, then repaints — fish's `commandline -f repaint`.
 # cwd changes from gho/yy persist: widgets run in the shell process.
-# gho, pj and `tv git-files` open television cables (~/.config/television/
-# cable) — the same keys do the same in fish and bash.
+# gho, pj and `tv git-files` (below) open television cables (~/.config/
+# television/cable) — the same keys do the same in fish and bash.
 _zle-run() {
     local cmd=${WIDGET#run-}
     zle -I
     $cmd </dev/tty
     zle reset-prompt
 }
-for _cmd in purple clip-last gho pj omp yy lazygit; do
+for _cmd in purple clip-last omp yy lazygit; do
     zle -N "run-$_cmd" _zle-run
 done
 unset _cmd
 
-# ctrl-e: tv git-files (bat preview, enter opens nvim).
+# tv pickers run --inline below the prompt. zle -I + reset-prompt redraws the
+# prompt where zle last drew it, wiping anything printed below; zle -I alone
+# redraws a fresh prompt under the output. So: a cancelled picker (cursor
+# left on the line below the prompt) steps back up and resets in place, and
+# output that must stay (onefetch after gho's cd, a pj task) gets zle -I only.
+
+# ctrl-e: tv git-files (bat preview, enter opens nvim, which restores the
+# cursor to tv's line).
 _zle-tv-git-files() {
     zle -I
-    tv git-files </dev/tty
+    tv git-files --inline </dev/tty
+    printf '\033[A' >/dev/tty
     zle reset-prompt
 }
 zle -N tv-git-files _zle-tv-git-files
+
+# ctrl-o: gho (ghq-repos cable); cd + clear + onefetch when something was
+# picked.
+_zle-gho() {
+    local before=$PWD
+    zle -I
+    gho </dev/tty
+    if [[ $PWD == "$before" ]]; then
+        printf '\033[A' >/dev/tty
+        zle reset-prompt
+    fi
+}
+zle -N gho-inline _zle-gho
+
+# ctrl-p, and down on an idle empty prompt (fish's _pj_bind_down; otherwise
+# normal history / multiline movement). pj reports through $PJ_STATE: `open`
+# = cancelled, `ran` = a task printed output, empty = no task sources
+# (PJ_QUIET keeps down silent outside projects).
+_zle-pj() {
+    if [[ $WIDGET == pj-down && -n $BUFFER ]]; then
+        zle down-line-or-history
+        return
+    fi
+    local state
+    state=$(mktemp) || return
+    zle -I
+    if [[ $WIDGET == pj-down ]]; then
+        PJ_STATE=$state PJ_QUIET=1 pj </dev/tty
+    else
+        PJ_STATE=$state pj </dev/tty
+    fi
+    case $(<$state) in
+        open) printf '\033[A' >/dev/tty; zle reset-prompt ;;
+        ran) ;;
+        *) zle reset-prompt ;;
+    esac
+    rm -f $state
+}
+zle -N pj-inline _zle-pj
+zle -N pj-down _zle-pj
+
 bindkey '^E' tv-git-files
 bindkey '^B' run-purple
 bindkey '^Y' run-clip-last
-bindkey '^O' run-gho
-bindkey '^P' run-pj
+bindkey '^O' gho-inline
+bindkey '^P' pj-inline
 bindkey '^A' run-omp
 # ctrl-f: yazi; yy cd's to yazi's exit dir on quit.
 bindkey '^F' run-yy
 bindkey '^G' run-lazygit
-
-# down: the pj cable on an idle, empty prompt; otherwise normal history /
-# multiline movement (fish's _pj_bind_down). PJ_QUIET makes it a silent no-op
-# outside projects.
-_zle-pj-down() {
-    if [[ -n $BUFFER ]]; then
-        zle down-line-or-history
-        return
-    fi
-    zle -I
-    PJ_QUIET=1 pj </dev/tty
-    zle reset-prompt
-}
-zle -N pj-down _zle-pj-down
 bindkey '^[[B' pj-down
 bindkey '^[OB' pj-down