feat(config): switch tv pickers to --inline and improve prompt redraw handling

dot_config/fish/functions/_gho_bind.fish

@@ -0,0 +1,13 @@
+function _gho_bind --description 'ctrl-o: gho (tv --inline), then redraw the prompt in the right place'
+    set -l before $PWD
+    gho
+    if test "$PWD" = "$before"
+        # Cancelled (or the nvim action ran): tv --inline left the cursor on
+        # the line below the prompt; step back so repaint redraws in place.
+        printf '\033[A' >/dev/tty
+    else
+        # cd + clear + onefetch: put the prompt below onefetch's output.
+        printf '\n' >/dev/tty
+    end
+    commandline -f repaint
+end

dot_config/fish/functions/_pj_bind.fish

@@ -0,0 +1,21 @@
+function _pj_bind --description 'ctrl-p / down: pj (tv --inline), then redraw the prompt in the right place'
+    # pj reports through $PJ_STATE: `open` = the picker was cancelled and
+    # left the cursor on the line below the prompt; empty = no task sources,
+    # nothing drawn — but fish's repaint after an external command still
+    # lands one line low, so both step back up. `ran` = a task printed
+    # output: new line, prompt below it.
+    set -lx PJ_STATE (mktemp)
+    if contains -- --quiet $argv
+        set -lx PJ_QUIET 1
+    end
+    pj
+    set -l state (cat $PJ_STATE)
+    switch "$state"
+        case open ''
+            printf '\033[A' >/dev/tty
+        case ran
+            printf '\n' >/dev/tty
+    end
+    rm -f $PJ_STATE
+    commandline -f repaint
+end

dot_config/fish/functions/_pj_bind_down.fish

@@ -13,9 +13,9 @@ function _pj_bind_down --description "down arrow: pj tv cable on an idle empty p
         return
     end
 
-    # pj is ~/.local/bin/pj (also ctrl-p), which opens the `pj` tv cable.
-    # PJ_QUIET keeps it silent when the tree has no task source at all, so
-    # down is a no-op outside projects instead of printing an error per press.
-    PJ_QUIET=1 pj
-    commandline -f repaint
+    # _pj_bind runs ~/.local/bin/pj (also ctrl-p), which opens the `pj` tv
+    # cable. --quiet (PJ_QUIET) keeps it silent when the tree has no task
+    # source at all, so down is a no-op outside projects instead of printing
+    # an error per press.
+    _pj_bind --quiet
 end

dot_config/fish/functions/_tv_inline.fish

@@ -0,0 +1,10 @@
+function _tv_inline --description 'tv --inline below the prompt, cursor back on the prompt line; stdout is the pick'
+    # tv --inline opens on the line below the prompt and leaves the cursor on
+    # its own first row when it exits; step back up so the following
+    # `commandline -f repaint` redraws the prompt in place instead of one line
+    # lower. /dev/tty keeps the move out of callers that capture stdout (gho).
+    tv $argv --inline
+    set -l st $status
+    printf '\033[A' >/dev/tty
+    return $st
+end

dot_config/fish/functions/fish_user_key_bindings.fish

@@ -11,13 +11,15 @@ function fish_user_key_bindings
         #   ctrl-g → lazygit overlay, ctrl-a → omp hsplit, ctrl-y → yazi vsplit,
         #   ctrl-h/j/k/l → vim-aware split nav (pass_keys.py).
         # ctrl-e: tv git-files (bat preview, enter opens nvim). ctrl-o, ctrl-p
-        # and down also open tv cables — same keys in zsh and bash.
-        bind -M $mode ctrl-e 'tv git-files; commandline -f repaint'
+        # and down also open tv cables — same keys in zsh and bash. tv runs
+        # --inline below the prompt; _tv_inline/_gho_bind/_pj_bind put the
+        # prompt back in place (or below any output) afterwards.
+        bind -M $mode ctrl-e '_tv_inline git-files; commandline -f repaint'
         bind -M $mode ctrl-b purple repaint
         bind -M $mode ctrl-y clip-last
 
-        bind -M $mode ctrl-o 'gho; commandline -f repaint'
-        bind -M $mode ctrl-p 'pj; commandline -f repaint'
+        bind -M $mode ctrl-o _gho_bind
+        bind -M $mode ctrl-p _pj_bind
         bind -M $mode ctrl-a 'omp; commandline -f repaint'
         bind -M $mode ctrl-w 'atuin ai inline; commandline -f repaint'
 

dot_config/fish/functions/gho.fish

@@ -1,6 +1,6 @@
 function gho --description 'pick a ghq repo / Obsidian vault (tv ghq-repos cable) + cd'
-    set -l dir (tv ghq-repos); or return
-    test -n "$dir"; or return
+    set -l dir (tv ghq-repos --inline); or return
+    test -n "$dir"; or return 1
     cd $dir; or return
     clear
     if test -d .git